OE3LXF-39 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3LXF-39. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1784630745	996.5 hPa	24.9 C deg	1017.7 hPa	0 C deg
1784623496	997.3 hPa	24.8 C deg	1018.5 hPa	0 C deg
1784614391	998.1 hPa	24.6 C deg	1019.3 hPa	0 C deg
1784587173	997.3 hPa	25.3 C deg	1018.5 hPa	0 C deg
1784581733	996.8 hPa	25.5 C deg	1018 hPa	0 C deg
1784565399	994.1 hPa	25.6 C deg	1015.2 hPa	0 C deg
1784559941	994 hPa	25.4 C deg	1015.1 hPa	0 C deg
1784556331	994 hPa	25.3 C deg	1015.2 hPa	0 C deg
1784539983	995.4 hPa	24.9 C deg	1016.6 hPa	0 C deg
1784538158	995.8 hPa	24.6 C deg	1017 hPa	0 C deg
1784530907	996.2 hPa	24.8 C deg	1017.4 hPa	0 C deg
1784529090	996.3 hPa	24.8 C deg	1017.5 hPa	0 C deg
1784527266	996.2 hPa	24.7 C deg	1017.4 hPa	0 C deg
1784525473	996.1 hPa	24.6 C deg	1017.3 hPa	0 C deg
1784509139	995.5 hPa	25.4 C deg	1016.7 hPa	0 C deg
1784500058	995.1 hPa	25.9 C deg	1016.2 hPa	0 C deg
1784494616	994.9 hPa	26.2 C deg	1015.9 hPa	0 C deg
1784447217	989.8 hPa	26.8 C deg	1010.7 hPa	0 C deg
1784441768	990.2 hPa	26.6 C deg	1011.2 hPa	0 C deg
1784438145	990.4 hPa	26.6 C deg	1011.3 hPa	0 C deg
1784430891	990.3 hPa	26.8 C deg	1011.2 hPa	0 C deg
1784427354	990.4 hPa	27 C deg	1011.3 hPa	0 C deg
1784409148	989.7 hPa	27.8 C deg	1010.5 hPa	0 C deg
1784401951	989.3 hPa	28.1 C deg	1010.2 hPa	0 C deg
1784396443	988.3 hPa	28.3 C deg	1009.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)