SP2ATB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2ATB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1765484447	529 Count	0 Count	0 Count	0 VDC	0 VDC
1765484386	528 Count	0 Count	0 Count	0 VDC	0 VDC
1765484325	527 Count	0 Count	0 Count	0 VDC	0 VDC
1765484298	526 Count	0 Count	0 Count	0 VDC	0 VDC
1765484275	524 Count	0 Count	0 Count	0 VDC	0 VDC
1765484236	523 Count	0 Count	0 Count	0 VDC	0 VDC
1765484231	522 Count	0 Count	0 Count	0 VDC	0 VDC
1765484181	521 Count	0 Count	0 Count	0 VDC	0 VDC
1765484123	520 Count	0 Count	0 Count	0 VDC	0 VDC
1765484073	519 Count	0 Count	0 Count	0 VDC	0 VDC
1765483940	517 Count	0 Count	0 Count	0 VDC	0 VDC
1765483879	516 Count	0 Count	0 Count	0 VDC	0 VDC
1765483818	515 Count	0 Count	0 Count	0 VDC	0 VDC
1765483757	514 Count	0 Count	0 Count	0 VDC	0 VDC
1765483696	513 Count	0 Count	0 Count	0 VDC	0 VDC
1765483636	512 Count	0 Count	0 Count	0 VDC	0 VDC
1765483575	511 Count	0 Count	0 Count	0 VDC	0 VDC
1765483514	510 Count	0 Count	0 Count	0 VDC	0 VDC
1765483453	509 Count	0 Count	0 Count	0 VDC	0 VDC
1765483392	508 Count	0 Count	0 Count	0 VDC	0 VDC
1765483331	507 Count	0 Count	0 Count	0 VDC	0 VDC
1765483270	506 Count	0 Count	0 Count	0 VDC	0 VDC
1765483210	505 Count	0 Count	0 Count	0 VDC	0 VDC
1765483149	504 Count	0 Count	0 Count	0 VDC	0 VDC
1765483088	503 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)