YM2KTR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM2KTR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1757514306	43 Pkt	-46 dBm	21 V
1757512482	46 Pkt	-46 dBm	21 V
1757510657	56 Pkt	-48 dBm	21 V
1757508832	45 Pkt	-46 dBm	21 V
1757507007	0 Pkt	-45 dBm	21 V
1757506456	44 Pkt	-42 dBm	21 V
1757504633	29 Pkt	-47 dBm	21 V
1757502809	53 Pkt	-44 dBm	21 V
1757500983	61 Pkt	-45 dBm	21 V
1757499159	54 Pkt	-44 dBm	21 V
1757497334	33 Pkt	-46 dBm	21 V
1757495509	42 Pkt	-45 dBm	21 V
1757493684	67 Pkt	-43 dBm	21 V
1757491857	108 Pkt	-45 dBm	21 V
1757490027	105 Pkt	-44 dBm	21 V
1757488197	3 Pkt	-46 dBm	21 V
1757486883	81 Pkt	-47 dBm	21 V
1757485054	79 Pkt	-44 dBm	21 V
1757483228	117 Pkt	-46 dBm	21 V
1757481398	98 Pkt	-45 dBm	21 V
1757479571	63 Pkt	-43 dBm	21 V
1757477745	83 Pkt	-44 dBm	21 V
1757475916	109 Pkt	-49 dBm	21 V
1757474085	3 Pkt	-50 dBm	21 V
1757473404	109 Pkt	-50 dBm	21 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)