9A1AAM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A1AAM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1780556245	12.3 Volt	640 Pkt	40 Pkt	74 Pcnt
1780554474	12.23 Volt	570 Pkt	40 Pkt	75 Pcnt
1780554445	12.23 Volt	570 Pkt	40 Pkt	75 Pcnt
1780552645	12.3 Volt	570 Pkt	50 Pkt	78 Pcnt
1780550866	12.3 Volt	510 Pkt	50 Pkt	75 Pcnt
1780550845	12.3 Volt	510 Pkt	50 Pkt	75 Pcnt
1780549045	12.3 Volt	470 Pkt	40 Pkt	77 Pcnt
1780547275	12.3 Volt	510 Pkt	40 Pkt	81 Pcnt
1780547245	12.3 Volt	510 Pkt	40 Pkt	81 Pcnt
1780545445	12.3 Volt	510 Pkt	40 Pkt	78 Pcnt
1780543645	12.3 Volt	490 Pkt	40 Pkt	80 Pcnt
1780541845	12.3 Volt	510 Pkt	50 Pkt	78 Pcnt
1780540056	12.3 Volt	510 Pkt	40 Pkt	78 Pcnt
1780540045	12.3 Volt	510 Pkt	40 Pkt	78 Pcnt
1780538245	12.3 Volt	520 Pkt	40 Pkt	83 Pcnt
1780536446	12.23 Volt	470 Pkt	40 Pkt	85 Pcnt
1780534646	12.23 Volt	410 Pkt	40 Pkt	75 Pcnt
1780532846	12.3 Volt	440 Pkt	40 Pkt	71 Pcnt
1780531046	12.3 Volt	520 Pkt	40 Pkt	74 Pcnt
1780529256	12.3 Volt	530 Pkt	40 Pkt	79 Pcnt
1780529246	12.3 Volt	530 Pkt	40 Pkt	79 Pcnt
1780527446	12.3 Volt	550 Pkt	50 Pkt	83 Pcnt
1780525649	12.23 Volt	540 Pkt	50 Pkt	75 Pcnt
1780525646	12.23 Volt	540 Pkt	50 Pkt	75 Pcnt
1780523846	12.3 Volt	550 Pkt	50 Pkt	72 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)