DO7EM-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DO7EM-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1780561162	999.7 hPa	19.5 C deg	1004.8 hPa	0 C deg
1780559349	999.9 hPa	19 C deg	1005 hPa	0 C deg
1780557530	999.8 hPa	18.5 C deg	1005 hPa	0 C deg
1780553914	999.8 hPa	17.8 C deg	1004.9 hPa	0 C deg
1780553901	999.8 hPa	17.8 C deg	1004.9 hPa	0 C deg
1780550270	999.9 hPa	17 C deg	1005.1 hPa	0 C deg
1780546652	1000.1 hPa	16.7 C deg	1005.3 hPa	0 C deg
1780543025	1000.3 hPa	17.1 C deg	1005.5 hPa	0 C deg
1780543012	1000.3 hPa	17.1 C deg	1005.5 hPa	0 C deg
1780541196	1000.5 hPa	17 C deg	1005.7 hPa	0 C deg
1780539387	1000.3 hPa	17 C deg	1005.5 hPa	0 C deg
1780537566	1000.6 hPa	17 C deg	1005.8 hPa	0 C deg
1780535748	1000.9 hPa	17.7 C deg	1006.1 hPa	0 C deg
1780533951	1000.9 hPa	17.8 C deg	1006 hPa	0 C deg
1780533951	1000.9 hPa	17.8 C deg	1006 hPa	0 C deg
1780530315	1000.1 hPa	18.2 C deg	1005.3 hPa	0 C deg
1780528502	1000.2 hPa	18.1 C deg	1005.3 hPa	0 C deg
1780528489	1000.2 hPa	18.1 C deg	1005.3 hPa	0 C deg
1780523045	1001.2 hPa	18.3 C deg	1006.4 hPa	0 C deg
1780513977	1002.9 hPa	19.4 C deg	1008 hPa	0 C deg
1780513970	1002.9 hPa	19.4 C deg	1008 hPa	0 C deg
1780510339	1003.8 hPa	20.2 C deg	1008.9 hPa	0 C deg
1780508540	1003.6 hPa	20.8 C deg	1008.7 hPa	0 C deg
1780508525	1003.6 hPa	20.8 C deg	1008.7 hPa	0 C deg
1780506723	1003.7 hPa	21.9 C deg	1008.8 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)