DF2AP-97 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF2AP-97. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1784792799	998.2 hPa	17 C deg	58.3 %	1024.5 hPa	0 C deg
1784790957	998.1 hPa	16.9 C deg	57.7 %	1024.4 hPa	0 C deg
1784787370	997.8 hPa	16.8 C deg	56.5 %	1024.1 hPa	0 C deg
1784785517	997.7 hPa	16.9 C deg	55.6 %	1023.9 hPa	0 C deg
1784783711	997.4 hPa	17 C deg	55.5 %	1023.7 hPa	0 C deg
1784781904	997.3 hPa	17 C deg	54.7 %	1023.6 hPa	0 C deg
1784780114	997.2 hPa	16.8 C deg	55 %	1023.5 hPa	0 C deg
1784778275	997.1 hPa	16.9 C deg	54.9 %	1023.4 hPa	0 C deg
1784776435	997.1 hPa	17 C deg	54.2 %	1023.4 hPa	0 C deg
1784774617	997.1 hPa	17.2 C deg	54 %	1023.3 hPa	0 C deg
1784772876	996.9 hPa	17.4 C deg	53.9 %	1023.1 hPa	0 C deg
1784770983	997 hPa	17.6 C deg	53.6 %	1023.2 hPa	0 C deg
1784769262	997.2 hPa	17.6 C deg	54.3 %	1023.4 hPa	0 C deg
1784767369	997.2 hPa	18 C deg	55.1 %	1023.3 hPa	0 C deg
1784765544	997 hPa	18 C deg	56.8 %	1023.2 hPa	0 C deg
1784763726	997 hPa	18.3 C deg	55.1 %	1023.1 hPa	0 C deg
1784761920	997 hPa	18.7 C deg	53.5 %	1023.1 hPa	0 C deg
1784760093	997 hPa	18.7 C deg	51.7 %	1023.1 hPa	0 C deg
1784758383	996.9 hPa	19.1 C deg	49.8 %	1023 hPa	0 C deg
1784756465	996.7 hPa	19.5 C deg	48.2 %	1022.7 hPa	0 C deg
1784754649	996.8 hPa	19.9 C deg	47.6 %	1022.8 hPa	0 C deg
1784752846	996.8 hPa	20 C deg	46.4 %	1022.8 hPa	0 C deg
1784751046	996.9 hPa	20.1 C deg	45.8 %	1022.8 hPa	0 C deg
1784749208	996.9 hPa	20.2 C deg	45.5 %	1022.9 hPa	0 C deg
1784747405	997 hPa	20.7 C deg	44.4 %	1022.9 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)