K2WLO-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object K2WLO-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Battery*	Enclosure Temp*	Exp.*
1753856474	12.13 Volts	92.09 Deg.F	17.24 Deg.F
1753851076	12.13 Volts	94.73 Deg.F	17.24 Deg.F
1753849276	12.16 Volts	96.49 Deg.F	17.24 Deg.F
1753843875	12.16 Volts	100.01 Deg.F	17.24 Deg.F
1753842077	12.19 Volts	101.77 Deg.F	17.24 Deg.F
1753838477	12.22 Volts	105.29 Deg.F	17.24 Deg.F
1753836676	12.22 Volts	107.05 Deg.F	17.24 Deg.F
1753834874	12.22 Volts	108.81 Deg.F	17.24 Deg.F
1753833074	12.25 Volts	110.57 Deg.F	17.24 Deg.F
1753831270	12.25 Volts	111.45 Deg.F	17.24 Deg.F
1753829499	12.19 Volts	111.45 Deg.F	17.24 Deg.F
1753827669	13.19 Volts	122.01 Deg.F	17.24 Deg.F
1753827657	13.21 Volts	120.25 Deg.F	17.24 Deg.F
1753827648	13.27 Volts	120.25 Deg.F	17.24 Deg.F
1753827526	13.21 Volts	123.77 Deg.F	23.4 Deg.F
1753827433	13.27 Volts	126.41 Deg.F	21.64 Deg.F
1753827423	13.27 Volts	126.41 Deg.F	21.64 Deg.F
1753827406	13.21 Volts	125.53 Deg.F	23.4 Deg.F
1753827394	13.27 Volts	126.41 Deg.F	21.64 Deg.F
1753827321	13.24 Volts	129.05 Deg.F	21.64 Deg.F
1753827202	13.33 Volts	133.45 Deg.F	24.28 Deg.F
1753827149	13.27 Volts	132.57 Deg.F	23.4 Deg.F
1753827140	13.3 Volts	132.57 Deg.F	23.4 Deg.F
1753827131	13.33 Volts	132.57 Deg.F	23.4 Deg.F
1753827115	13.33 Volts	131.69 Deg.F	21.64 Deg.F

*Used Equation Coefficients:

Battery: 0, 0.0293, 0

Enclosure Temp: 0, 0.88, -459.67

Exp.: 0, 0.88, 17.24

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)