N7UV-44 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N7UV-44. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	V_Bat*	V_Ext*
1777265474	4 Count	152 Count	4.02 VDC	13.4 VDC
1777264574	3 Count	119 Count	4.02 VDC	13.38 VDC
1777263674	2 Count	88 Count	4.02 VDC	13.38 VDC
1777262773	1 Count	59 Count	4.02 VDC	13.38 VDC
1777261873	0 Count	32 Count	4.02 VDC	13.38 VDC
1777260972	24 Count	1017 Count	4.02 VDC	13.38 VDC
1777260072	23 Count	990 Count	4.02 VDC	13.38 VDC
1777259172	22 Count	954 Count	4.02 VDC	13.38 VDC
1777258271	21 Count	929 Count	4.02 VDC	13.4 VDC
1777257371	20 Count	861 Count	4.02 VDC	13.36 VDC
1777256470	19 Count	799 Count	4.02 VDC	13.38 VDC
1777255570	18 Count	765 Count	4.02 VDC	13.38 VDC
1777254678	17 Count	734 Count	4.02 VDC	13.36 VDC
1777253778	16 Count	701 Count	4.02 VDC	13.38 VDC
1777252877	15 Count	673 Count	4.01 VDC	13.4 VDC
1777251977	14 Count	635 Count	4.01 VDC	13.38 VDC
1777251077	13 Count	565 Count	4.03 VDC	13.4 VDC
1777250176	12 Count	487 Count	4.02 VDC	13.4 VDC
1777249276	11 Count	454 Count	4.01 VDC	13.4 VDC
1777248376	10 Count	403 Count	4.02 VDC	13.4 VDC
1777247475	9 Count	346 Count	4.01 VDC	13.4 VDC
1777246575	8 Count	275 Count	4.03 VDC	13.4 VDC
1777245674	5 Count	224 Count	4.02 VDC	13.4 VDC
1777244774	4 Count	193 Count	4.02 VDC	13.4 VDC
1777243874	3 Count	154 Count	4.02 VDC	13.36 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)