CT2HRE-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object CT2HRE-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Celsius*	Atm_Press*
1781787631	43.7 C	1025.25 hPa
1781782586	38.6 C	1025.38 hPa
1781782041	41 C	1024.38 hPa
1781776164	34.1 C	1025 hPa
1781769938	28.8 C	1025 hPa
1781768055	25.2 C	1022.38 hPa
1781767804	24.6 C	1007.75 hPa
1781719393	34.9 C	1025.25 hPa
1781715915	38.3 C	1023.25 hPa
1781714500	59.7 C	1024 hPa
1781705989	39.1 C	1025.5 hPa
1781704054	35.4 C	1026.5 hPa
1781703509	36 C	1026.5 hPa
1781703293	34.5 C	1027.88 hPa
1781703079	34.2 C	1027 hPa
1781701581	30.9 C	1026.25 hPa
1781701346	30.2 C	1025.38 hPa
1781700792	27 C	1008 hPa
1781201054	39.4 C	1027.25 hPa
1781197676	39.7 C	1026 hPa
1781197059	40.7 C	1024.88 hPa
1781189752	43.1 C	1026.88 hPa
1781183351	39 C	1026.38 hPa
1781182772	38.8 C	1028 hPa
1781177797	37.2 C	1031.5 hPa

*Used Equation Coefficients:

Celsius: 0, 0.1, -50

Atm_Press: 0, 0.125, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)