W0CHP-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W0CHP-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1788693307	2.2 Load	27.8 DegC	2658 Mb	17198 Pkt	7164 Pkt
1788692497	2.27 Load	27.8 DegC	2655 Mb	16017 Pkt	6176 Pkt
1788691707	2.02 Load	27.8 DegC	2657 Mb	16801 Pkt	7366 Pkt
1788690877	2.06 Load	27.8 DegC	2708 Mb	15926 Pkt	6375 Pkt
1788690017	1.86 Load	27.8 DegC	2709 Mb	16788 Pkt	7290 Pkt
1788689197	1.97 Load	27.8 DegC	2835 Mb	17749 Pkt	8209 Pkt
1788688372	1.84 Load	27.8 DegC	2833 Mb	17107 Pkt	7471 Pkt
1788687517	1.26 Load	27.8 DegC	2661 Mb	15942 Pkt	6352 Pkt
1788686672	1.6 Load	27.8 DegC	2636 Mb	16795 Pkt	7420 Pkt
1788685907	1.3 Load	27.8 DegC	2694 Mb	15718 Pkt	6187 Pkt
1788684322	1.69 Load	27.8 DegC	2849 Mb	16874 Pkt	7383 Pkt
1788683512	1.6 Load	27.8 DegC	2819 Mb	15975 Pkt	6423 Pkt
1788682682	1.59 Load	27.8 DegC	2850 Mb	17473 Pkt	7863 Pkt
1788681857	1.26 Load	27.8 DegC	2849 Mb	16332 Pkt	6789 Pkt
1788681072	2.02 Load	27.8 DegC	2694 Mb	18084 Pkt	8239 Pkt
1788680272	2.35 Load	27.8 DegC	2848 Mb	106796 Pkt	44104 Pkt
1788679514	1.6 Load	27.8 DegC	2850 Mb	16991 Pkt	7832 Pkt
1788678727	1.61 Load	27.8 DegC	2849 Mb	15726 Pkt	6402 Pkt
1788677167	1.67 Load	27.8 DegC	2663 Mb	16736 Pkt	7440 Pkt
1788676342	1.62 Load	27.8 DegC	2845 Mb	15701 Pkt	6233 Pkt
1788675597	1.5 Load	27.8 DegC	2666 Mb	16794 Pkt	7576 Pkt
1788674747	1.9 Load	27.8 DegC	2823 Mb	15828 Pkt	6145 Pkt
1788673957	2.39 Load	27.8 DegC	2698 Mb	17094 Pkt	7694 Pkt
1788673202	2.45 Load	27.8 DegC	2849 Mb	18029 Pkt	8668 Pkt
1788672367	2.26 Load	27.8 DegC	2667 Mb	16880 Pkt	7649 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)