YO3JAZ-TT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YO3JAZ-TT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CO2*	CPU*	Temp*	Baro*	Load*
1761559088	510 ppm	44 C	27 C	999.2 hPa	78 %
1761558728	510 ppm	44 C	27 C	999.2 hPa	78 %
1761558368	470 ppm	44 C	27 C	999.6 hPa	78.4 %
1761558008	490 ppm	44 C	27 C	999.6 hPa	78.4 %
1761557648	600 ppm	44 C	27.5 C	998.8 hPa	78 %
1761557287	580 ppm	44 C	27.5 C	998.4 hPa	78 %
1761556927	550 ppm	44 C	27.5 C	998.8 hPa	78 %
1761556567	520 ppm	44 C	27 C	998.8 hPa	78 %
1761556207	540 ppm	44 C	27 C	998.8 hPa	78 %
1761555847	530 ppm	44 C	27 C	998.8 hPa	78 %
1761555487	540 ppm	44 C	27.5 C	999.2 hPa	78 %
1761555127	570 ppm	44 C	27.5 C	998.8 hPa	78 %
1761554767	550 ppm	44 C	27.5 C	998.8 hPa	77.6 %
1761554407	520 ppm	44 C	27 C	999.2 hPa	78.4 %
1761554047	550 ppm	44 C	27.5 C	999.2 hPa	77.6 %
1761553687	550 ppm	44 C	27.5 C	999.2 hPa	78 %
1761553327	570 ppm	44 C	27.5 C	998.8 hPa	78 %
1761552967	590 ppm	44 C	27.5 C	998.8 hPa	78 %
1761552607	590 ppm	45.2 C	27.5 C	999.2 hPa	78.4 %
1761552247	620 ppm	45.2 C	27.5 C	998.8 hPa	78 %
1761551887	690 ppm	44 C	27.5 C	998.8 hPa	78 %
1761551527	720 ppm	44 C	27.5 C	998.8 hPa	77.2 %
1761551167	760 ppm	45.2 C	27.5 C	998.8 hPa	77.2 %
1761550807	780 ppm	44 C	27.5 C	998.8 hPa	78 %
1761550447	780 ppm	44 C	27.5 C	999.2 hPa	77.2 %

*Used Equation Coefficients:

CO2: 0, 10, 0

CPU: 0, 0.4, 0

Temp: 0, 0.5, -25

Baro: 0, 0.4, 950

Load: 0, 0.4, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)