YM2KBI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM2KBI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1784705472	73 Pkt	4 Pkt	21 Pkt	-65 dBm	12 V
1784704534	73 Pkt	4 Pkt	23 Pkt	-65 dBm	11.98 V
1784703605	57 Pkt	5 Pkt	12 Pkt	-65 dBm	12 V
1784702674	54 Pkt	6 Pkt	11 Pkt	-65 dBm	12 V
1784701743	51 Pkt	4 Pkt	14 Pkt	-65 dBm	11.98 V
1784700808	56 Pkt	4 Pkt	18 Pkt	-64 dBm	11.98 V
1784699877	50 Pkt	5 Pkt	17 Pkt	-65 dBm	12 V
1784698947	45 Pkt	4 Pkt	15 Pkt	-65 dBm	12 V
1784698017	59 Pkt	4 Pkt	15 Pkt	-64 dBm	11.98 V
1784697083	57 Pkt	3 Pkt	7 Pkt	-68 dBm	12 V
1784696151	63 Pkt	4 Pkt	9 Pkt	-66 dBm	11.98 V
1784695232	53 Pkt	4 Pkt	21 Pkt	-65 dBm	12 V
1784694290	55 Pkt	4 Pkt	20 Pkt	-66 dBm	12 V
1784693359	50 Pkt	4 Pkt	12 Pkt	-65 dBm	12 V
1784692429	72 Pkt	3 Pkt	21 Pkt	-66 dBm	12 V
1784691494	63 Pkt	4 Pkt	17 Pkt	-65 dBm	12 V
1784690562	49 Pkt	7 Pkt	12 Pkt	-66 dBm	11.98 V
1784689650	44 Pkt	4 Pkt	13 Pkt	-65 dBm	12 V
1784688698	57 Pkt	4 Pkt	9 Pkt	-64 dBm	12 V
1784687766	56 Pkt	4 Pkt	12 Pkt	-64 dBm	11.98 V
1784686836	53 Pkt	4 Pkt	9 Pkt	-65 dBm	12 V
1784685906	52 Pkt	3 Pkt	10 Pkt	-65 dBm	12 V
1784684977	46 Pkt	4 Pkt	3 Pkt	-67 dBm	12 V
1784684048	39 Pkt	4 Pkt	5 Pkt	-65 dBm	11.98 V
1784683121	50 Pkt	4 Pkt	6 Pkt	-64 dBm	12 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)