AI0ET-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AI0ET-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vaux*	Vmain*	Pi_temp*
1782257353	12.55 Volts	0.01 Volts	57 Deg.C
1782257292	13.76 Volts	0.01 Volts	57 Deg.C
1782257262	13.75 Volts	0.01 Volts	58 Deg.C
1782257232	13.74 Volts	0.01 Volts	58 Deg.C
1782257202	13.72 Volts	0.01 Volts	58 Deg.C
1782257172	12.38 Volts	0.01 Volts	58 Deg.C
1782257142	12.38 Volts	0.01 Volts	59 Deg.C
1781980701	12.21 Volts	0.01 Volts	57 Deg.C
1781980671	12.2 Volts	0 Volts	57 Deg.C
1781980641	12.2 Volts	0.01 Volts	57 Deg.C
1781980611	12.2 Volts	0.01 Volts	57 Deg.C
1781980580	12.22 Volts	0.01 Volts	57 Deg.C
1781980551	12.22 Volts	0.01 Volts	57 Deg.C
1781980521	12.22 Volts	0.01 Volts	56 Deg.C
1781980491	12.23 Volts	0.01 Volts	57 Deg.C
1781980461	12.23 Volts	0.01 Volts	57 Deg.C
1781980431	12.23 Volts	0.01 Volts	56 Deg.C
1781980401	12.22 Volts	0.01 Volts	57 Deg.C
1781980371	12.23 Volts	0.01 Volts	57 Deg.C
1781980341	12.23 Volts	0.01 Volts	57 Deg.C
1781980311	12.21 Volts	0.01 Volts	57 Deg.C
1781980280	12.23 Volts	0.02 Volts	57 Deg.C
1781980250	12.23 Volts	0.01 Volts	57 Deg.C
1781980221	12.22 Volts	0.01 Volts	56 Deg.C
1781980191	12.18 Volts	0.01 Volts	56 Deg.C

*Used Equation Coefficients:

Vaux: 0, 0.01, 0

Vmain: 0, 0.01, 0

Pi_temp: 0, 1, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)