IU1FIL-22 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU1FIL-22. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*	Batt*	Volt Aux*	Ampere Aux*
1777206342	19 Pkt/10m	7 Pkt/10m	4.61 Volt	13.3 Volt	0.21 Ampere
1777205738	19 Pkt/10m	7 Pkt/10m	4.63 Volt	13.3 Volt	0.19 Ampere
1777205133	18 Pkt/10m	6 Pkt/10m	4.61 Volt	13.3 Volt	0.16 Ampere
1777204529	19 Pkt/10m	8 Pkt/10m	4.61 Volt	13.3 Volt	0.14 Ampere
1777203925	22 Pkt/10m	8 Pkt/10m	4.59 Volt	13.2 Volt	0.1 Ampere
1777203321	24 Pkt/10m	6 Pkt/10m	4.59 Volt	13.2 Volt	0.08 Ampere
1777202717	24 Pkt/10m	8 Pkt/10m	4.61 Volt	13.2 Volt	0.05 Ampere
1777202113	22 Pkt/10m	6 Pkt/10m	4.63 Volt	13.2 Volt	0.06 Ampere
1777201509	4 Pkt/10m	0 Pkt/10m	4.63 Volt	13.2 Volt	0.06 Ampere
1777201321	26 Pkt/10m	5 Pkt/10m	4.61 Volt	13.2 Volt	0.09 Ampere
1777200717	26 Pkt/10m	8 Pkt/10m	4.59 Volt	13.2 Volt	0.08 Ampere
1777200113	23 Pkt/10m	6 Pkt/10m	4.61 Volt	13.2 Volt	0.04 Ampere
1777199509	21 Pkt/10m	5 Pkt/10m	4.61 Volt	13.2 Volt	0.09 Ampere
1777198905	19 Pkt/10m	6 Pkt/10m	4.61 Volt	13.2 Volt	0.06 Ampere
1777198301	19 Pkt/10m	6 Pkt/10m	4.61 Volt	13.2 Volt	0.06 Ampere
1777197697	21 Pkt/10m	5 Pkt/10m	4.59 Volt	13.2 Volt	0.04 Ampere
1777197092	19 Pkt/10m	5 Pkt/10m	4.59 Volt	13.1 Volt	0.04 Ampere
1777196488	22 Pkt/10m	7 Pkt/10m	4.61 Volt	13.1 Volt	0.03 Ampere
1777195884	24 Pkt/10m	6 Pkt/10m	4.59 Volt	13.1 Volt	0.04 Ampere
1777195280	20 Pkt/10m	3 Pkt/10m	4.55 Volt	13.1 Volt	0.02 Ampere
1777194676	17 Pkt/10m	6 Pkt/10m	4.61 Volt	13.1 Volt	0.02 Ampere
1777194057	19 Pkt/10m	4 Pkt/10m	4.61 Volt	13.1 Volt	0.02 Ampere
1777193453	21 Pkt/10m	4 Pkt/10m	4.59 Volt	13.1 Volt	0.01 Ampere
1777192841	26 Pkt/10m	9 Pkt/10m	4.59 Volt	13.1 Volt	0.01 Ampere
1777192231	18 Pkt/10m	7 Pkt/10m	4.61 Volt	13.1 Volt	0.01 Ampere

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Volt Aux: 0, 0.1, 0

Ampere Aux: 0, 0.01, -1.27

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)