ED7ZAD-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ED7ZAD-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Eff24*
1788567262	14.1 Volt	130 Pkt	0 Pkt	91 Pcnt	95 Pcnt
1788566636	14.1 Volt	130 Pkt	0 Pkt	91 Pcnt	95 Pcnt
1788566036	14.1 Volt	130 Pkt	0 Pkt	89 Pcnt	95 Pcnt
1788565436	14.1 Volt	130 Pkt	0 Pkt	87 Pcnt	95 Pcnt
1788564836	14.1 Volt	140 Pkt	0 Pkt	88 Pcnt	95 Pcnt
1788564236	14.1 Volt	150 Pkt	0 Pkt	88 Pcnt	95 Pcnt
1788563636	14.1 Volt	180 Pkt	0 Pkt	89 Pcnt	95 Pcnt
1788563036	14.1 Volt	200 Pkt	0 Pkt	89 Pcnt	95 Pcnt
1788562436	14.1 Volt	200 Pkt	0 Pkt	93 Pcnt	95 Pcnt
1788561836	14.1 Volt	200 Pkt	0 Pkt	93 Pcnt	95 Pcnt
1788561236	14.1 Volt	210 Pkt	0 Pkt	93 Pcnt	95 Pcnt
1788560636	14.1 Volt	210 Pkt	0 Pkt	95 Pcnt	95 Pcnt
1788560036	14.1 Volt	170 Pkt	0 Pkt	97 Pcnt	95 Pcnt
1788559436	14.1 Volt	160 Pkt	10 Pkt	99 Pcnt	95 Pcnt
1788558836	14.1 Volt	150 Pkt	10 Pkt	98 Pcnt	95 Pcnt
1788558236	14.1 Volt	150 Pkt	10 Pkt	98 Pcnt	95 Pcnt
1788557636	14.1 Volt	140 Pkt	10 Pkt	97 Pcnt	95 Pcnt
1788557036	14.1 Volt	130 Pkt	10 Pkt	97 Pcnt	95 Pcnt
1788556436	14.1 Volt	130 Pkt	10 Pkt	97 Pcnt	95 Pcnt
1788555836	14.1 Volt	120 Pkt	10 Pkt	98 Pcnt	95 Pcnt
1788555236	14.1 Volt	120 Pkt	10 Pkt	100 Pcnt	95 Pcnt
1788554636	14.1 Volt	120 Pkt	10 Pkt	100 Pcnt	95 Pcnt
1788554036	14.1 Volt	110 Pkt	10 Pkt	100 Pcnt	95 Pcnt
1788553436	14.1 Volt	110 Pkt	10 Pkt	100 Pcnt	95 Pcnt
1788552836	14.1 Volt	120 Pkt	10 Pkt	100 Pcnt	95 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff24: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)