W5GI-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W5GI-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*	InetiGate*
1753613711	157 Pkts	157 Pkts	85 Pkts	32 C	4 Pkts
1753610111	130 Pkts	130 Pkts	73 Pkts	32 C	4 Pkts
1753606511	158 Pkts	157 Pkts	93 Pkts	32 C	4 Pkts
1753602911	181 Pkts	179 Pkts	82 Pkts	32 C	4 Pkts
1753599330	181 Pkts	177 Pkts	85 Pkts	32 C	4 Pkts
1753595711	135 Pkts	134 Pkts	74 Pkts	32 C	4 Pkts
1753592111	133 Pkts	133 Pkts	78 Pkts	33 C	0 Pkts
1753588511	106 Pkts	106 Pkts	58 Pkts	33 C	1 Pkts
1753584911	92 Pkts	92 Pkts	56 Pkts	33 C	2 Pkts
1753574110	123 Pkts	123 Pkts	80 Pkts	33 C	0 Pkts
1753570510	66 Pkts	66 Pkts	37 Pkts	33 C	0 Pkts
1753566910	54 Pkts	53 Pkts	27 Pkts	33 C	0 Pkts
1753563310	34 Pkts	34 Pkts	18 Pkts	34 C	0 Pkts
1753559711	44 Pkts	44 Pkts	33 Pkts	33 C	0 Pkts
1753556111	61 Pkts	61 Pkts	50 Pkts	32 C	0 Pkts
1753552511	62 Pkts	62 Pkts	47 Pkts	33 C	0 Pkts
1753548911	84 Pkts	84 Pkts	74 Pkts	33 C	0 Pkts
1753545311	88 Pkts	88 Pkts	73 Pkts	33 C	0 Pkts
1753541711	66 Pkts	66 Pkts	56 Pkts	33 C	0 Pkts
1753538111	94 Pkts	94 Pkts	69 Pkts	34 C	0 Pkts
1753530911	181 Pkts	176 Pkts	133 Pkts	34 C	0 Pkts
1753527310	180 Pkts	178 Pkts	137 Pkts	33 C	0 Pkts
1753523710	142 Pkts	138 Pkts	103 Pkts	33 C	0 Pkts
1753520119	149 Pkts	148 Pkts	117 Pkts	33 C	0 Pkts
1753516510	146 Pkts	145 Pkts	110 Pkts	33 C	0 Pkts

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)