TA2SK-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA2SK-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1761510298	0.13 Load	45.28 DegC	675 Mb	370 Pkt	151 Pkt
1761509998	0.13 Load	45.28 DegC	678 Mb	257 Pkt	145 Pkt
1761509698	0.14 Load	45.76 DegC	679 Mb	232 Pkt	147 Pkt
1761509399	0.17 Load	45.28 DegC	681 Mb	259 Pkt	146 Pkt
1761509098	0.19 Load	46.25 DegC	684 Mb	296 Pkt	145 Pkt
1761508798	0.14 Load	45.28 DegC	681 Mb	246 Pkt	142 Pkt
1761508498	0.16 Load	46.25 DegC	682 Mb	235 Pkt	148 Pkt
1761508198	0.14 Load	45.28 DegC	674 Mb	286 Pkt	149 Pkt
1761507898	0.18 Load	45.76 DegC	679 Mb	212 Pkt	132 Pkt
1761507598	0.13 Load	46.25 DegC	682 Mb	230 Pkt	149 Pkt
1761507299	0.2 Load	45.28 DegC	683 Mb	291 Pkt	143 Pkt
1761506998	0.16 Load	46.25 DegC	683 Mb	264 Pkt	157 Pkt
1761506698	0.18 Load	45.76 DegC	674 Mb	244 Pkt	159 Pkt
1761506398	0.16 Load	45.76 DegC	679 Mb	272 Pkt	134 Pkt
1761506098	0.18 Load	44.79 DegC	678 Mb	219 Pkt	127 Pkt
1761505798	0.14 Load	44.79 DegC	676 Mb	223 Pkt	134 Pkt
1761505498	0.19 Load	45.28 DegC	673 Mb	246 Pkt	145 Pkt
1761505198	0.14 Load	45.76 DegC	683 Mb	346 Pkt	137 Pkt
1761504898	0.11 Load	45.28 DegC	684 Mb	266 Pkt	136 Pkt
1761504598	0.2 Load	47.23 DegC	681 Mb	231 Pkt	140 Pkt
1761504298	0.17 Load	45.76 DegC	672 Mb	262 Pkt	132 Pkt
1761503998	0.16 Load	45.28 DegC	675 Mb	233 Pkt	145 Pkt
1761503699	0.12 Load	45.76 DegC	677 Mb	247 Pkt	143 Pkt
1761503398	0.19 Load	45.76 DegC	688 Mb	266 Pkt	158 Pkt
1761503098	0.13 Load	45.76 DegC	683 Mb	259 Pkt	154 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)