SR8KP-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR8KP-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1753633734	26 Count	64 Count	18 Count	1.93 VDC
1753632834	23 Count	56 Count	16 Count	2.05 VDC
1753631933	20 Count	48 Count	14 Count	2.25 VDC
1753631032	17 Count	40 Count	12 Count	2.19 VDC
1753630132	14 Count	34 Count	10 Count	2.18 VDC
1753629231	11 Count	27 Count	8 Count	2.1 VDC
1753628330	8 Count	21 Count	6 Count	2.14 VDC
1753627430	5 Count	14 Count	4 Count	2.22 VDC
1753626529	2 Count	8 Count	2 Count	2.27 VDC
1753625628	415 Count	1007 Count	299 Count	2.23 VDC
1753624728	412 Count	999 Count	297 Count	2.23 VDC
1753623827	409 Count	991 Count	295 Count	2.24 VDC
1753622026	402 Count	973 Count	291 Count	2.31 VDC
1753621140	396 Count	964 Count	289 Count	2.5 VDC
1753620239	393 Count	956 Count	287 Count	2.49 VDC
1753619338	390 Count	950 Count	285 Count	2.54 VDC
1753618438	387 Count	941 Count	283 Count	2.59 VDC
1753617537	384 Count	932 Count	281 Count	2.46 VDC
1753614835	375 Count	908 Count	275 Count	2.26 VDC
1753613934	372 Count	899 Count	273 Count	2.15 VDC
1753613052	369 Count	893 Count	271 Count	2.16 VDC
1753612133	366 Count	887 Count	269 Count	2.34 VDC
1753611232	363 Count	880 Count	267 Count	2.41 VDC
1753610332	360 Count	873 Count	265 Count	2.48 VDC
1753609431	357 Count	865 Count	263 Count	2.42 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)