W5GI-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W5GI-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1753552487	1 Pkts	0 Pkts	0 Pkts	29 C
1753548889	2 Pkts	1 Pkts	0 Pkts	27 C
1753541686	2 Pkts	1 Pkts	0 Pkts	29 C
1753538087	3 Pkts	2 Pkts	1 Pkts	30 C
1753534487	5 Pkts	5 Pkts	0 Pkts	30 C
1753530887	1 Pkts	1 Pkts	1 Pkts	31 C
1753527287	1 Pkts	1 Pkts	1 Pkts	31 C
1753523687	0 Pkts	0 Pkts	0 Pkts	30 C
1753520115	3 Pkts	3 Pkts	1 Pkts	30 C
1753516487	6 Pkts	5 Pkts	3 Pkts	30 C
1753512887	4 Pkts	2 Pkts	1 Pkts	30 C
1753509287	4 Pkts	4 Pkts	2 Pkts	30 C
1753505687	7 Pkts	6 Pkts	2 Pkts	30 C
1753502087	9 Pkts	7 Pkts	2 Pkts	30 C
1753498503	16 Pkts	12 Pkts	3 Pkts	30 C
1753494887	15 Pkts	12 Pkts	3 Pkts	28 C
1753491287	10 Pkts	9 Pkts	2 Pkts	27 C
1753487687	0 Pkts	0 Pkts	0 Pkts	28 C
1753484087	0 Pkts	0 Pkts	0 Pkts	27 C
1753480487	0 Pkts	0 Pkts	0 Pkts	28 C
1753476887	0 Pkts	0 Pkts	0 Pkts	28 C
1753473287	1 Pkts	1 Pkts	1 Pkts	28 C
1753469687	0 Pkts	0 Pkts	0 Pkts	29 C
1753466087	0 Pkts	0 Pkts	0 Pkts	29 C
1753462487	5 Pkts	5 Pkts	2 Pkts	30 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)