TSTING-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TSTING-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	C_Tmp*
1784698045	12.56 Volt	230 Pkt	77 Pcnt	79.7 F
1784697745	12.56 Volt	220 Pkt	77 Pcnt	79.7 F
1784697445	12.56 Volt	220 Pkt	77 Pcnt	79.7 F
1784697146	12.56 Volt	220 Pkt	77 Pcnt	79.7 F
1784697145	12.56 Volt	220 Pkt	77 Pcnt	79.7 F
1784696845	12.56 Volt	220 Pkt	77 Pcnt	78.8 F
1784696546	12.56 Volt	210 Pkt	77 Pcnt	79.7 F
1784696545	12.56 Volt	210 Pkt	77 Pcnt	79.7 F
1784696245	12.56 Volt	210 Pkt	77 Pcnt	78.8 F
1784695946	12.56 Volt	210 Pkt	75 Pcnt	78.8 F
1784695945	12.56 Volt	210 Pkt	75 Pcnt	78.8 F
1784695645	12.56 Volt	210 Pkt	78 Pcnt	78.8 F
1784695346	12.56 Volt	210 Pkt	78 Pcnt	78.8 F
1784695345	12.56 Volt	210 Pkt	78 Pcnt	78.8 F
1784695045	12.56 Volt	200 Pkt	79 Pcnt	78.8 F
1784694746	12.56 Volt	200 Pkt	81 Pcnt	79.7 F
1784694745	12.56 Volt	200 Pkt	81 Pcnt	79.7 F
1784694445	12.56 Volt	190 Pkt	81 Pcnt	79.7 F
1784694146	12.56 Volt	190 Pkt	80 Pcnt	79.7 F
1784694145	12.56 Volt	190 Pkt	80 Pcnt	79.7 F
1784693845	12.56 Volt	190 Pkt	80 Pcnt	79.7 F
1784693546	12.56 Volt	190 Pkt	80 Pcnt	80.6 F
1784693545	12.56 Volt	190 Pkt	80 Pcnt	80.6 F
1784693245	12.56 Volt	200 Pkt	80 Pcnt	80.6 F
1784692946	12.56 Volt	200 Pkt	79 Pcnt	80.6 F

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

C_Tmp: 0, 0.9, -83.2

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)