SP7THR-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP7THR-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1787587623	0 Count	303 Count	0 Count	0 VDC	0 VDC
1787586423	0 Count	303 Count	0 Count	0 VDC	0 VDC
1787585223	0 Count	302 Count	0 Count	0 VDC	0 VDC
1787584023	0 Count	301 Count	0 Count	0 VDC	0 VDC
1787582823	0 Count	299 Count	0 Count	0 VDC	0 VDC
1787581623	0 Count	280 Count	0 Count	0 VDC	0 VDC
1787580423	0 Count	252 Count	0 Count	0 VDC	0 VDC
1787579222	0 Count	250 Count	0 Count	0 VDC	0 VDC
1787578022	0 Count	249 Count	0 Count	0 VDC	0 VDC
1787576822	0 Count	248 Count	0 Count	0 VDC	0 VDC
1787575622	0 Count	247 Count	0 Count	0 VDC	0 VDC
1787574422	0 Count	246 Count	0 Count	0 VDC	0 VDC
1787573222	0 Count	245 Count	0 Count	0 VDC	0 VDC
1787572027	0 Count	243 Count	0 Count	0 VDC	0 VDC
1787569626	0 Count	241 Count	0 Count	0 VDC	0 VDC
1787568426	0 Count	239 Count	0 Count	0 VDC	0 VDC
1787567226	0 Count	238 Count	0 Count	0 VDC	0 VDC
1787566026	0 Count	237 Count	0 Count	0 VDC	0 VDC
1787564826	0 Count	235 Count	0 Count	0 VDC	0 VDC
1787563627	0 Count	234 Count	0 Count	0 VDC	0 VDC
1787562428	0 Count	233 Count	0 Count	0 VDC	0 VDC
1787561226	0 Count	224 Count	0 Count	0 VDC	0 VDC
1787560026	0 Count	214 Count	0 Count	0 VDC	0 VDC
1787558826	0 Count	210 Count	0 Count	0 VDC	0 VDC
1787557626	0 Count	202 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)