SA6GWE-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SA6GWE-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761628552	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	11 count/10m
1761627352	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	7 count/10m
1761626152	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	4 count/10m
1761624952	0.01 Rx Erlang	0 Tx Erlang	7 count/10m	0 count/10m	4 count/10m
1761623752	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	6 count/10m
1761622552	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	5 count/10m
1761621352	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	0 count/10m	7 count/10m
1761620152	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	6 count/10m
1761618952	0.01 Rx Erlang	0.01 Tx Erlang	7 count/10m	0 count/10m	5 count/10m
1761617752	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	6 count/10m
1761616552	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	5 count/10m
1761615361	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	6 count/10m
1761614152	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	7 count/10m
1761612952	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	5 count/10m
1761611752	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	6 count/10m
1761610552	0.02 Rx Erlang	0.01 Tx Erlang	14 count/10m	0 count/10m	7 count/10m
1761609352	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	0 count/10m	8 count/10m
1761608152	0.01 Rx Erlang	0.01 Tx Erlang	12 count/10m	0 count/10m	6 count/10m
1761606952	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	5 count/10m
1761605752	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	5 count/10m
1761604552	0.01 Rx Erlang	0 Tx Erlang	7 count/10m	0 count/10m	4 count/10m
1761603352	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	5 count/10m
1761602152	0.01 Rx Erlang	0.01 Tx Erlang	13 count/10m	0 count/10m	7 count/10m
1761600952	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	4 count/10m
1761599752	0.01 Rx Erlang	0 Tx Erlang	6 count/10m	0 count/10m	4 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)