SP6EU Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP6EU. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1773271805	38 Deg.C	3 %
1773271201	39 Deg.C	3 %
1773270605	40 Deg.C	3 %
1773270001	41 Deg.C	3 %
1773269402	41 Deg.C	3 %
1773268805	42 Deg.C	3 %
1773268202	42 Deg.C	3 %
1773267605	41 Deg.C	3 %
1773267001	41 Deg.C	3 %
1773266405	41 Deg.C	3 %
1773265802	39 Deg.C	3 %
1773265202	39 Deg.C	3 %
1773264605	41 Deg.C	3 %
1773264001	42 Deg.C	3 %
1773263405	41 Deg.C	3 %
1773262802	39 Deg.C	3 %
1773262205	38 Deg.C	3 %
1773261601	39 Deg.C	3 %
1773261001	38 Deg.C	3 %
1773260405	39 Deg.C	3 %
1773259802	38 Deg.C	3 %
1773259205	38 Deg.C	3 %
1773258602	39 Deg.C	3 %
1773258005	40 Deg.C	3 %
1773257401	41 Deg.C	3 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)