AD4WX-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AD4WX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	InetIn*
1765678768	48 Pkts	47 Pkts	28 Pkts
1765675168	55 Pkts	54 Pkts	23 Pkts
1765664366	66 Pkts	65 Pkts	10 Pkts
1765660767	63 Pkts	62 Pkts	16 Pkts
1765657166	64 Pkts	63 Pkts	11 Pkts
1765653567	55 Pkts	54 Pkts	24 Pkts
1765649967	78 Pkts	75 Pkts	26 Pkts
1765646367	48 Pkts	43 Pkts	32 Pkts
1765642767	66 Pkts	62 Pkts	72 Pkts
1765639167	56 Pkts	51 Pkts	36 Pkts
1765635567	43 Pkts	39 Pkts	31 Pkts
1765631967	16 Pkts	16 Pkts	27 Pkts
1765628367	20 Pkts	19 Pkts	23 Pkts
1765624767	9 Pkts	8 Pkts	10 Pkts
1765621167	19 Pkts	19 Pkts	9 Pkts
1765613967	102 Pkts	98 Pkts	65 Pkts
1765610367	125 Pkts	119 Pkts	78 Pkts
1765606767	115 Pkts	111 Pkts	53 Pkts
1765603167	99 Pkts	94 Pkts	51 Pkts
1765599567	75 Pkts	71 Pkts	34 Pkts
1765595967	73 Pkts	72 Pkts	29 Pkts
1765592367	75 Pkts	70 Pkts	31 Pkts
1765588767	62 Pkts	60 Pkts	17 Pkts
1765585166	83 Pkts	81 Pkts	7 Pkts
1765581566	41 Pkts	40 Pkts	48 Pkts

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

InetIn: 0, 1, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)