DL2AKT-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL2AKT-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1753802237	969.4 hPa	23.9 C deg	52.7 %	997.9 hPa	0 C deg
1753800437	969.4 hPa	23.9 C deg	52.3 %	997.8 hPa	0 C deg
1753797755	969.5 hPa	24.1 C deg	51.2 %	998 hPa	0 C deg
1753795952	969.5 hPa	23.6 C deg	51.5 %	998 hPa	0 C deg
1753794127	969.9 hPa	23.1 C deg	52.1 %	998.5 hPa	0 C deg
1753792150	970.2 hPa	22.3 C deg	52.6 %	998.9 hPa	0 C deg
1753788759	970 hPa	22.5 C deg	51.9 %	998.7 hPa	0 C deg
1753785763	970.3 hPa	21.5 C deg	52.5 %	999 hPa	0 C deg
1753783426	970.4 hPa	21 C deg	52.9 %	999.2 hPa	0 C deg
1753781626	970.3 hPa	20.8 C deg	52.9 %	999.2 hPa	0 C deg
1753779659	970.3 hPa	20.9 C deg	52.5 %	1025.8 hPa	0 C deg
1753777408	970.6 hPa	20.8 C deg	52.1 %	1026.2 hPa	0 C deg
1753775589	970.6 hPa	20.4 C deg	52.8 %	1026.2 hPa	0 C deg
1753773384	970.6 hPa	20.1 C deg	53.1 %	1026.3 hPa	0 C deg
1753771595	970.7 hPa	19.8 C deg	54.1 %	1026.5 hPa	0 C deg
1753769763	970.8 hPa	16.5 C deg	61.3 %	970.8 hPa	0 C deg
1753706795	967.4 hPa	20.2 C deg	51.6 %	1016.1 hPa	0 C deg
1753704993	967.4 hPa	18 C deg	55.7 %	1016.5 hPa	0 C deg
1753704451	967.3 hPa	16.5 C deg	58.7 %	1016.6 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)