LZ1PDB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ1PDB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatu*	Humidity*	Pressure*	Battery*
1753495541	25 °C	51 %RH	952 hPa	2.9 V
1753494940	24 °C	52 %RH	952 hPa	3.1 V
1753494340	25 °C	52 %RH	952 hPa	3.1 V
1753493741	25 °C	50 %RH	952 hPa	2.9 V
1753493141	25 °C	50 %RH	952 hPa	2.9 V
1753492540	25 °C	50 %RH	952 hPa	3.2 V
1753491940	25 °C	50 %RH	952 hPa	3.2 V
1753490740	25 °C	50 %RH	952 hPa	3.2 V
1753490140	25 °C	49 %RH	952 hPa	3.2 V
1753489540	25 °C	48 %RH	952 hPa	3.2 V
1753488940	25 °C	49 %RH	952 hPa	3 V
1753488340	26 °C	46 %RH	952 hPa	3.2 V
1753487740	26 °C	49 %RH	952 hPa	3.2 V
1753487140	27 °C	46 %RH	952 hPa	3.2 V
1753486540	27 °C	46 %RH	952 hPa	3 V
1753485940	27 °C	46 %RH	952 hPa	3.2 V
1753485343	27 °C	46 %RH	952 hPa	3.2 V
1753484740	27 °C	46 %RH	952 hPa	3.3 V
1753484140	27 °C	46 %RH	952 hPa	3.6 V
1753483540	26 °C	45 %RH	952 hPa	3.7 V
1753482166	27 °C	44 %RH	951 hPa	3.3 V
1753474431	29 °C	36 %RH	951 hPa	2.9 V
1753473831	29 °C	36 %RH	951 hPa	2.8 V
1753473231	30 °C	35 %RH	951 hPa	2.8 V
1753472631	30 °C	36 %RH	951 hPa	3.1 V

*Used Equation Coefficients:

Temperatu: 0, 1, 0

Humidity: 0, 1, 0

Pressure: 0, 1, 0

Battery: 0, 0.1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)