TB2TII-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB2TII-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1753842113	59 Pkt	83 Pkt	12 Pkt	-62 dBm	0.37 V
1753841173	53 Pkt	81 Pkt	6 Pkt	-57 dBm	0.25 V
1753840231	62 Pkt	74 Pkt	8 Pkt	-58 dBm	0.25 V
1753839285	54 Pkt	78 Pkt	10 Pkt	-59 dBm	0.25 V
1753838351	58 Pkt	66 Pkt	12 Pkt	-61 dBm	0.39 V
1753837406	54 Pkt	77 Pkt	11 Pkt	-61 dBm	0.37 V
1753835528	57 Pkt	91 Pkt	11 Pkt	-61 dBm	0.25 V
1753834586	63 Pkt	87 Pkt	16 Pkt	-63 dBm	0.37 V
1753833643	60 Pkt	70 Pkt	14 Pkt	-61 dBm	0.25 V
1753832740	67 Pkt	72 Pkt	9 Pkt	-62 dBm	0.39 V
1753831759	60 Pkt	80 Pkt	14 Pkt	-60 dBm	0.39 V
1753830815	64 Pkt	83 Pkt	9 Pkt	-58 dBm	0.39 V
1753829875	60 Pkt	75 Pkt	12 Pkt	-58 dBm	0.37 V
1753828932	76 Pkt	71 Pkt	10 Pkt	-57 dBm	0.21 V
1753827991	70 Pkt	71 Pkt	14 Pkt	-58 dBm	0.39 V
1753827049	68 Pkt	73 Pkt	11 Pkt	-62 dBm	0.37 V
1753826123	67 Pkt	63 Pkt	9 Pkt	-62 dBm	0.37 V
1753825166	63 Pkt	71 Pkt	12 Pkt	-59 dBm	0.37 V
1753824224	65 Pkt	64 Pkt	8 Pkt	-59 dBm	0.37 V
1753823285	60 Pkt	75 Pkt	13 Pkt	-59 dBm	0.25 V
1753822345	60 Pkt	72 Pkt	11 Pkt	-59 dBm	0.25 V
1753821408	8 Pkt	5 Pkt	4 Pkt	-59 dBm	0.37 V
1753820701	59 Pkt	75 Pkt	8 Pkt	-58 dBm	0.39 V
1753819764	60 Pkt	81 Pkt	5 Pkt	-58 dBm	0.25 V
1753818826	52 Pkt	89 Pkt	5 Pkt	-58 dBm	0.37 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)