DB5RRH-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB5RRH-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1784665610	13.8 Volt	210 Pkt	20 Pkt	96 Pcnt	28.5 C
1784665310	13.8 Volt	220 Pkt	20 Pkt	96 Pcnt	28.5 C
1784665010	13.8 Volt	220 Pkt	30 Pkt	97 Pcnt	29 C
1784664711	13.8 Volt	230 Pkt	30 Pkt	97 Pcnt	29 C
1784664411	13.8 Volt	230 Pkt	30 Pkt	97 Pcnt	29 C
1784664111	13.8 Volt	230 Pkt	30 Pkt	97 Pcnt	29 C
1784663811	13.8 Volt	230 Pkt	30 Pkt	97 Pcnt	29 C
1784663511	13.8 Volt	230 Pkt	30 Pkt	98 Pcnt	29 C
1784663211	13.8 Volt	220 Pkt	30 Pkt	98 Pcnt	29 C
1784662911	13.8 Volt	220 Pkt	30 Pkt	97 Pcnt	29 C
1784662611	13.8 Volt	220 Pkt	20 Pkt	97 Pcnt	29 C
1784662311	13.8 Volt	220 Pkt	30 Pkt	97 Pcnt	29 C
1784662011	13.8 Volt	220 Pkt	20 Pkt	97 Pcnt	29 C
1784661711	13.8 Volt	210 Pkt	20 Pkt	97 Pcnt	29 C
1784661411	13.8 Volt	200 Pkt	10 Pkt	97 Pcnt	29 C
1784661111	13.8 Volt	190 Pkt	10 Pkt	97 Pcnt	29 C
1784660811	13.8 Volt	180 Pkt	10 Pkt	96 Pcnt	29 C
1784660511	13.8 Volt	180 Pkt	10 Pkt	96 Pcnt	29.5 C
1784660211	13.8 Volt	180 Pkt	10 Pkt	96 Pcnt	29.5 C
1784659911	13.8 Volt	180 Pkt	10 Pkt	97 Pcnt	29.5 C
1784659611	13.8 Volt	190 Pkt	10 Pkt	97 Pcnt	29.5 C
1784659311	13.8 Volt	190 Pkt	10 Pkt	98 Pcnt	29.5 C
1784659011	13.8 Volt	190 Pkt	10 Pkt	98 Pcnt	29.5 C
1784658711	13.8 Volt	190 Pkt	10 Pkt	99 Pcnt	29.5 C
1784658411	13.8 Volt	200 Pkt	10 Pkt	99 Pcnt	29.5 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)