W8VFR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W8VFR-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761510375	0.09 Rx Erlang	0.01 Tx Erlang	89 count/10m	5 count/10m	7 count/10m
1761509174	0.11 Rx Erlang	0.01 Tx Erlang	68 count/10m	5 count/10m	8 count/10m
1761506773	0.12 Rx Erlang	0.01 Tx Erlang	123 count/10m	7 count/10m	11 count/10m
1761505574	0.11 Rx Erlang	0.01 Tx Erlang	122 count/10m	1 count/10m	15 count/10m
1761504373	0.12 Rx Erlang	0.01 Tx Erlang	109 count/10m	0 count/10m	10 count/10m
1761503173	0.1 Rx Erlang	0.01 Tx Erlang	104 count/10m	2 count/10m	13 count/10m
1761500775	0.11 Rx Erlang	0.01 Tx Erlang	106 count/10m	0 count/10m	11 count/10m
1761499578	0.11 Rx Erlang	0.01 Tx Erlang	111 count/10m	3 count/10m	8 count/10m
1761498374	0.07 Rx Erlang	0.01 Tx Erlang	64 count/10m	2 count/10m	7 count/10m
1761497175	0.05 Rx Erlang	0.01 Tx Erlang	49 count/10m	0 count/10m	5 count/10m
1761495973	0.09 Rx Erlang	0.01 Tx Erlang	81 count/10m	0 count/10m	6 count/10m
1761494774	0.09 Rx Erlang	0.01 Tx Erlang	85 count/10m	2 count/10m	8 count/10m
1761492374	0.09 Rx Erlang	0.01 Tx Erlang	86 count/10m	4 count/10m	6 count/10m
1761491174	0.08 Rx Erlang	0.01 Tx Erlang	73 count/10m	2 count/10m	7 count/10m
1761489974	0.08 Rx Erlang	0.01 Tx Erlang	82 count/10m	4 count/10m	7 count/10m
1761488774	0.12 Rx Erlang	0.01 Tx Erlang	113 count/10m	5 count/10m	6 count/10m
1761486375	0.13 Rx Erlang	0.01 Tx Erlang	124 count/10m	5 count/10m	7 count/10m
1761485173	0.09 Rx Erlang	0.01 Tx Erlang	85 count/10m	3 count/10m	6 count/10m
1761482774	0.11 Rx Erlang	0.01 Tx Erlang	98 count/10m	3 count/10m	7 count/10m
1761480373	0.09 Rx Erlang	0.01 Tx Erlang	92 count/10m	6 count/10m	7 count/10m
1761477974	0.11 Rx Erlang	0.01 Tx Erlang	106 count/10m	7 count/10m	6 count/10m
1761476773	0.13 Rx Erlang	0.01 Tx Erlang	118 count/10m	4 count/10m	8 count/10m
1761471974	0.1 Rx Erlang	0.01 Tx Erlang	97 count/10m	5 count/10m	7 count/10m
1761470775	0.11 Rx Erlang	0.01 Tx Erlang	97 count/10m	3 count/10m	7 count/10m
1761469573	0.1 Rx Erlang	0.01 Tx Erlang	88 count/10m	2 count/10m	8 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)