PE1PBA-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PE1PBA-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1761544510	0.07 Rx Erlang	0.01 Tx Erlang	38 count/10m	0 count/10m	11 count/10m
1761543310	0.06 Rx Erlang	0.01 Tx Erlang	29 count/10m	0 count/10m	7 count/10m
1761542110	0.08 Rx Erlang	0.01 Tx Erlang	37 count/10m	0 count/10m	9 count/10m
1761540910	0.05 Rx Erlang	0.02 Tx Erlang	34 count/10m	0 count/10m	11 count/10m
1761539710	0.06 Rx Erlang	0.01 Tx Erlang	29 count/10m	0 count/10m	7 count/10m
1761538510	0.06 Rx Erlang	0.01 Tx Erlang	32 count/10m	0 count/10m	8 count/10m
1761537310	0.06 Rx Erlang	0.02 Tx Erlang	29 count/10m	0 count/10m	11 count/10m
1761536110	0.06 Rx Erlang	0.01 Tx Erlang	27 count/10m	0 count/10m	8 count/10m
1761534910	0.05 Rx Erlang	0.01 Tx Erlang	28 count/10m	0 count/10m	8 count/10m
1761533710	0.06 Rx Erlang	0.01 Tx Erlang	34 count/10m	0 count/10m	11 count/10m
1761532510	0.05 Rx Erlang	0.01 Tx Erlang	26 count/10m	0 count/10m	8 count/10m
1761531310	0.06 Rx Erlang	0.01 Tx Erlang	33 count/10m	0 count/10m	8 count/10m
1761530110	0.05 Rx Erlang	0.02 Tx Erlang	32 count/10m	0 count/10m	11 count/10m
1761528914	0.06 Rx Erlang	0.01 Tx Erlang	29 count/10m	0 count/10m	8 count/10m
1761527710	0.07 Rx Erlang	0.01 Tx Erlang	30 count/10m	0 count/10m	8 count/10m
1761526510	0.05 Rx Erlang	0.02 Tx Erlang	32 count/10m	0 count/10m	11 count/10m
1761525310	0.06 Rx Erlang	0.01 Tx Erlang	26 count/10m	0 count/10m	8 count/10m
1761524110	0.06 Rx Erlang	0.01 Tx Erlang	30 count/10m	0 count/10m	8 count/10m
1761521710	0.07 Rx Erlang	0.01 Tx Erlang	30 count/10m	0 count/10m	8 count/10m
1761520510	0.05 Rx Erlang	0.01 Tx Erlang	27 count/10m	0 count/10m	8 count/10m
1761519310	0.06 Rx Erlang	0.01 Tx Erlang	31 count/10m	0 count/10m	11 count/10m
1761518110	0.07 Rx Erlang	0.01 Tx Erlang	30 count/10m	0 count/10m	8 count/10m
1761516910	0.05 Rx Erlang	0.01 Tx Erlang	27 count/10m	0 count/10m	8 count/10m
1761515710	0.05 Rx Erlang	0.01 Tx Erlang	29 count/10m	0 count/10m	11 count/10m
1761513310	0.06 Rx Erlang	0.01 Tx Erlang	31 count/10m	0 count/10m	9 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)