DG0OPK-98 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DG0OPK-98. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1757471239	960.9 hPa	23.8 C deg	1019.1 hPa	0 C deg
1757469439	961.1 hPa	23.8 C deg	1019.3 hPa	0 C deg
1757465831	961.2 hPa	23.9 C deg	1019.4 hPa	0 C deg
1757464039	961.3 hPa	23.9 C deg	1019.5 hPa	0 C deg
1757462238	961.6 hPa	23.9 C deg	1019.8 hPa	0 C deg
1757460438	961.5 hPa	23.9 C deg	1019.7 hPa	0 C deg
1757458631	961.7 hPa	23.9 C deg	1019.9 hPa	0 C deg
1757455031	962 hPa	23.9 C deg	1020.2 hPa	0 C deg
1757453231	962.4 hPa	23.9 C deg	1020.6 hPa	0 C deg
1757451437	962.5 hPa	23.9 C deg	1020.7 hPa	0 C deg
1757447831	962.7 hPa	23.9 C deg	1021 hPa	0 C deg
1757442436	962.9 hPa	23.9 C deg	1021.2 hPa	0 C deg
1757440636	962.7 hPa	23.9 C deg	1021 hPa	0 C deg
1757438836	962.7 hPa	24 C deg	1020.9 hPa	0 C deg
1757437036	962.4 hPa	24 C deg	1020.6 hPa	0 C deg
1757435230	962.2 hPa	24 C deg	1020.4 hPa	0 C deg
1757433435	962.1 hPa	24 C deg	1020.3 hPa	0 C deg
1757431630	962.1 hPa	24.1 C deg	1020.3 hPa	0 C deg
1757429834	962 hPa	24.2 C deg	1020.2 hPa	0 C deg
1757428035	962.2 hPa	24.2 C deg	1020.3 hPa	0 C deg
1757424430	961.7 hPa	24.2 C deg	1019.9 hPa	0 C deg
1757420830	961.8 hPa	24.1 C deg	1019.9 hPa	0 C deg
1757417233	961.7 hPa	24 C deg	1019.9 hPa	0 C deg
1757415432	961.7 hPa	24 C deg	1019.9 hPa	0 C deg
1757413635	961.8 hPa	23.9 C deg	1020.1 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)