N0FUN-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N0FUN-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPUTemp*	SysLoad*	RAMUse*	DiskUse*	Iac*
1787576448	31.6 degC	2 %	13 %	2 %	0.33 Amps
1787575848	31.6 degC	6 %	13 %	2 %	0.33 Amps
1787575248	31.2 degC	3 %	14 %	2 %	0.32 Amps
1787574648	31.2 degC	9 %	14 %	2 %	0.33 Amps
1787574048	31.2 degC	1 %	14 %	2 %	0.32 Amps
1787573448	31.2 degC	8 %	14 %	2 %	0.33 Amps
1787572848	30.8 degC	22 %	14 %	2 %	0.33 Amps
1787572247	31.6 degC	39 %	13 %	2 %	0.33 Amps
1787571648	31.6 degC	48 %	14 %	2 %	0.34 Amps
1787571048	31.2 degC	57 %	14 %	2 %	0.33 Amps
1787570448	30.4 degC	47 %	14 %	2 %	0.33 Amps
1787569848	30.8 degC	42 %	14 %	2 %	0.32 Amps
1787569247	31.2 degC	40 %	14 %	2 %	0.33 Amps
1787568648	31.6 degC	24 %	13 %	2 %	0.33 Amps
1787568048	31.2 degC	21 %	13 %	2 %	0.33 Amps
1787567448	31.2 degC	8 %	13 %	2 %	0.33 Amps
1787566847	31.2 degC	19 %	13 %	2 %	0.33 Amps
1787566248	31.2 degC	11 %	13 %	2 %	0.33 Amps
1787565648	31.6 degC	1 %	13 %	2 %	0.33 Amps
1787565049	31.2 degC	3 %	13 %	2 %	0.33 Amps
1787564449	31.2 degC	15 %	14 %	2 %	0.32 Amps
1787563848	31.2 degC	6 %	14 %	2 %	0.33 Amps
1787563248	31.2 degC	8 %	14 %	2 %	0.33 Amps
1787562648	31.2 degC	4 %	14 %	2 %	0.33 Amps
1787562048	31.6 degC	24 %	14 %	2 %	0.33 Amps

*Used Equation Coefficients:

CPUTemp: 0, 0.4, 0

SysLoad: 0, 1, 0

RAMUse: 0, 1, 0

DiskUse: 0, 1, 0

Iac: 0, 0.01, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)