EL-EA1PYD Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-EA1PYD. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Value1*	Value2*	Value3*	Value4*
1761413243	8807066 RX Erlang	0.03 TX Erlang	12 RXcount/10m	5 TXcount/10m
1761412651	2935687.5 RX Erlang	0.15 TX Erlang	16 RXcount/10m	4 TXcount/10m
1761409043	20549770 RX Erlang	0.03 TX Erlang	0 RXcount/10m	7 TXcount/10m
1761408443	2935680 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1761407843	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1761407243	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1761406643	8807031 RX Erlang	0.02 TX Erlang	0 RXcount/10m	3 TXcount/10m
1761403643	2935672 RX Erlang	0 TX Erlang	0 RXcount/10m	1 TXcount/10m
1761403043	8807014 RX Erlang	0.02 TX Erlang	0 RXcount/10m	3 TXcount/10m
1761401243	2935668 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1761400643	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1761399443	2935665 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1761398843	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1761398243	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1761394043	2935656 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1761391643	0.57 RX Erlang	0 TX Erlang	21 RXcount/10m	1 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)