VK4RBF-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RBF-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1761485399	13.62 Volt	110 Pkt	60 Pkt	32 Pcnt
1761483599	13.62 Volt	110 Pkt	60 Pkt	28 Pcnt
1761481795	13.62 Volt	90 Pkt	50 Pkt	26 Pcnt
1761478192	13.62 Volt	90 Pkt	40 Pkt	29 Pcnt
1761476390	13.62 Volt	90 Pkt	40 Pkt	28 Pcnt
1761472787	13.62 Volt	100 Pkt	50 Pkt	29 Pcnt
1761470985	13.62 Volt	100 Pkt	50 Pkt	26 Pcnt
1761469184	13.62 Volt	90 Pkt	40 Pkt	24 Pcnt
1761467381	13.62 Volt	90 Pkt	40 Pkt	26 Pcnt
1761465580	13.62 Volt	100 Pkt	50 Pkt	31 Pcnt
1761463778	13.62 Volt	110 Pkt	50 Pkt	31 Pcnt
1761461976	13.62 Volt	110 Pkt	40 Pkt	28 Pcnt
1761460175	13.62 Volt	120 Pkt	40 Pkt	32 Pcnt
1761458373	13.62 Volt	130 Pkt	50 Pkt	33 Pcnt
1761454769	13.62 Volt	120 Pkt	50 Pkt	29 Pcnt
1761452968	13.62 Volt	160 Pkt	70 Pkt	36 Pcnt
1761451166	13.69 Volt	190 Pkt	90 Pkt	39 Pcnt
1761449364	13.62 Volt	140 Pkt	60 Pkt	33 Pcnt
1761447565	13.62 Volt	150 Pkt	60 Pkt	35 Pcnt
1761445761	13.62 Volt	160 Pkt	70 Pkt	36 Pcnt
1761443959	13.62 Volt	150 Pkt	60 Pkt	31 Pcnt
1761442157	13.62 Volt	150 Pkt	60 Pkt	31 Pcnt
1761440359	13.62 Volt	150 Pkt	60 Pkt	30 Pcnt
1761434950	13.39 Volt	340 Pkt	120 Pkt	47 Pcnt
1761429545	13.62 Volt	530 Pkt	160 Pkt	52 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)