SP6ML-FM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP6ML-FM. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1787598606	57 Deg.C	2 %
1787598002	57 Deg.C	2 %
1787597402	58 Deg.C	2 %
1787596805	57 Deg.C	2 %
1787596202	55 Deg.C	2 %
1787595605	34 Deg.C	2 %
1787595002	36 Deg.C	2 %
1787594406	36 Deg.C	2 %
1787593801	34 Deg.C	2 %
1787593202	34 Deg.C	2 %
1787592605	35 Deg.C	1 %
1787592002	38 Deg.C	1 %
1787591406	37 Deg.C	1 %
1787590802	37 Deg.C	1 %
1787590205	37 Deg.C	1 %
1787589602	37 Deg.C	1 %
1787589001	38 Deg.C	1 %
1787588405	37 Deg.C	1 %
1787587802	36 Deg.C	1 %
1787587206	36 Deg.C	1 %
1787586603	37 Deg.C	1 %
1787586006	37 Deg.C	1 %
1787585402	36 Deg.C	1 %
1787584805	38 Deg.C	1 %
1787584202	36 Deg.C	1 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)