5P0A-27 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 5P0A-27. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Celsius*	Rel_Hum*	Atm_Press*
1756133986	20.8 C	61.18 %	1016.38 hPa
1756133303	18.5 C	61.99 %	1017.88 hPa
1756131584	19.9 C	59.18 %	1017.75 hPa
1756114696	23.2 C	55.79 %	1018.75 hPa
1756114474	22 C	57.14 %	1018.75 hPa
1756112014	18.9 C	63.64 %	1019.88 hPa
1756103690	14.5 C	69.32 %	1018.63 hPa
1756094659	13.1 C	69.63 %	1018.38 hPa
1756085629	13 C	69.31 %	1018.25 hPa
1756076599	13.3 C	68.84 %	1019.63 hPa
1756067569	13.9 C	66.92 %	1019.75 hPa
1756058539	17.2 C	67.66 %	1019.13 hPa
1756058349	16.2 C	68.04 %	1019 hPa
1756057965	14.9 C	69.15 %	1019 hPa
1756055067	15.2 C	67.87 %	1019.75 hPa
1756048494	18.5 C	61.81 %	1018.88 hPa
1756048263	17.9 C	62.36 %	1019 hPa
1756045342	17.2 C	62.57 %	1019.13 hPa
1756042736	18.8 C	60.53 %	1019.38 hPa
1756041109	19 C	60.6 %	1020 hPa
1756014019	11.8 C	81.43 %	1018.75 hPa
1756004989	10.4 C	80.93 %	1018.5 hPa
1755986928	9.7 C	71.65 %	1018.63 hPa
1755977899	15.9 C	63.67 %	1018.88 hPa
1755966264	18.5 C	54.25 %	1017.38 hPa

*Used Equation Coefficients:

Celsius: 0, 0.1, -50

Rel_Hum: 0, 0.01, 0

Atm_Press: 0, 0.125, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)