VCAPK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VCAPK. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	DgS1h*	Eff1h*
1784670788	14.03 Volt	1040 Pkt	2.08 Pcnt	70 Pcnt
1784670488	14.03 Volt	1060 Pkt	1.93 Pcnt	70 Pcnt
1784670188	14.03 Volt	1040 Pkt	1.94 Pcnt	69 Pcnt
1784669888	14.03 Volt	1050 Pkt	1.85 Pcnt	69 Pcnt
1784669588	14.03 Volt	1110 Pkt	1.65 Pcnt	70 Pcnt
1784669306	14.03 Volt	1100 Pkt	1.59 Pcnt	70 Pcnt
1784669288	14.03 Volt	1100 Pkt	1.59 Pcnt	70 Pcnt
1784668988	14.03 Volt	1110 Pkt	1.78 Pcnt	70 Pcnt
1784668688	14.03 Volt	1140 Pkt	1.86 Pcnt	71 Pcnt
1784668388	14.03 Volt	1160 Pkt	2.03 Pcnt	71 Pcnt
1784668088	14.03 Volt	1160 Pkt	2.01 Pcnt	70 Pcnt
1784667788	14.03 Volt	1150 Pkt	2.02 Pcnt	70 Pcnt
1784667488	14.03 Volt	1150 Pkt	1.78 Pcnt	70 Pcnt
1784667188	14.03 Volt	1140 Pkt	1.87 Pcnt	71 Pcnt
1784666888	14.03 Volt	1110 Pkt	1.89 Pcnt	70 Pcnt
1784666588	14.03 Volt	1120 Pkt	2.03 Pcnt	71 Pcnt
1784666288	14.03 Volt	1100 Pkt	2.07 Pcnt	71 Pcnt
1784665988	14.03 Volt	1070 Pkt	2.05 Pcnt	70 Pcnt
1784665710	14.03 Volt	1040 Pkt	2.1 Pcnt	70 Pcnt
1784665688	14.03 Volt	1040 Pkt	2.1 Pcnt	70 Pcnt
1784665388	14.03 Volt	1030 Pkt	1.98 Pcnt	70 Pcnt
1784665088	14.03 Volt	1000 Pkt	1.89 Pcnt	70 Pcnt
1784664788	14.03 Volt	990 Pkt	1.63 Pcnt	70 Pcnt
1784664500	14.03 Volt	970 Pkt	1.72 Pcnt	70 Pcnt
1784664188	14.03 Volt	960 Pkt	1.58 Pcnt	69 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

DgS1h: 0, 0.001, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)