SR6NPK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SR6NPK. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Eff1h*	T_ext*
1772582990	12.3 Volt	330 Pkt	48 Pcnt	1.5 C
1772582989	12.3 Volt	330 Pkt	48 Pcnt	1.5 C
1772582689	12.38 Volt	320 Pkt	48 Pcnt	1.5 C
1772582389	12.38 Volt	320 Pkt	48 Pcnt	1.5 C
1772582090	12.3 Volt	320 Pkt	49 Pcnt	1.5 C
1772582089	12.3 Volt	320 Pkt	49 Pcnt	1.5 C
1772581789	12.3 Volt	320 Pkt	49 Pcnt	1.5 C
1772581489	12.3 Volt	330 Pkt	50 Pcnt	1.5 C
1772581190	12.3 Volt	320 Pkt	49 Pcnt	1.5 C
1772581189	12.3 Volt	320 Pkt	49 Pcnt	1.5 C
1772580889	12.38 Volt	330 Pkt	50 Pcnt	1.5 C
1772580589	12.38 Volt	330 Pkt	51 Pcnt	1.5 C
1772580290	12.3 Volt	340 Pkt	53 Pcnt	1.5 C
1772580289	12.3 Volt	340 Pkt	53 Pcnt	1.5 C
1772579989	12.38 Volt	360 Pkt	55 Pcnt	1.5 C
1772579689	12.3 Volt	370 Pkt	56 Pcnt	2 C
1772579390	12.3 Volt	370 Pkt	57 Pcnt	2 C
1772579389	12.3 Volt	370 Pkt	57 Pcnt	2 C
1772579089	12.38 Volt	370 Pkt	57 Pcnt	2 C
1772578789	12.38 Volt	380 Pkt	57 Pcnt	2 C
1772578490	12.3 Volt	380 Pkt	56 Pcnt	2 C
1772578489	12.3 Volt	380 Pkt	56 Pcnt	2 C
1772578189	12.38 Volt	390 Pkt	55 Pcnt	2 C
1772577889	12.3 Volt	390 Pkt	55 Pcnt	2 C
1772577590	12.38 Volt	390 Pkt	55 Pcnt	2 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

T_ext: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)