VK4RBT-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RBT-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1789970262	14.14 Volt	360 Pkt	10 Pkt	87 Pcnt
1789969362	14.14 Volt	380 Pkt	10 Pkt	88 Pcnt
1789968461	14.14 Volt	370 Pkt	10 Pkt	90 Pcnt
1789967560	14.14 Volt	350 Pkt	10 Pkt	86 Pcnt
1789966659	14.14 Volt	320 Pkt	10 Pkt	84 Pcnt
1789965758	14.14 Volt	330 Pkt	10 Pkt	84 Pcnt
1789964857	14.14 Volt	340 Pkt	10 Pkt	83 Pcnt
1789963956	14.14 Volt	320 Pkt	10 Pkt	84 Pcnt
1789963055	14.14 Volt	350 Pkt	10 Pkt	85 Pcnt
1789962154	14.14 Volt	380 Pkt	10 Pkt	86 Pcnt
1789961254	14.14 Volt	390 Pkt	10 Pkt	82 Pcnt
1789960353	14.14 Volt	400 Pkt	10 Pkt	81 Pcnt
1789959452	14.14 Volt	390 Pkt	20 Pkt	82 Pcnt
1789958551	14.14 Volt	350 Pkt	20 Pkt	80 Pcnt
1789957650	14.14 Volt	360 Pkt	20 Pkt	81 Pcnt
1789956749	14.14 Volt	360 Pkt	20 Pkt	80 Pcnt
1789955848	14.14 Volt	390 Pkt	30 Pkt	74 Pcnt
1789954948	14.14 Volt	420 Pkt	50 Pkt	70 Pcnt
1789954047	14.14 Volt	430 Pkt	50 Pkt	69 Pcnt
1789953146	14.14 Volt	470 Pkt	60 Pkt	70 Pcnt
1789952245	14.14 Volt	440 Pkt	60 Pkt	72 Pcnt
1789951344	14.14 Volt	370 Pkt	40 Pkt	76 Pcnt
1789950443	14.14 Volt	380 Pkt	50 Pkt	72 Pcnt
1789949542	14.14 Volt	380 Pkt	50 Pkt	70 Pcnt
1789948641	14.14 Volt	430 Pkt	50 Pkt	72 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)