N8OYZ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N8OYZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1789944102	0 Pkts	0 Pkts	0 Pkts	14 C
1789940502	0 Pkts	0 Pkts	0 Pkts	15 C
1789936902	0 Pkts	0 Pkts	0 Pkts	15 C
1789933302	0 Pkts	0 Pkts	0 Pkts	15 C
1789929702	0 Pkts	0 Pkts	0 Pkts	15 C
1789926102	0 Pkts	0 Pkts	0 Pkts	15 C
1789922502	0 Pkts	0 Pkts	0 Pkts	14 C
1789918902	0 Pkts	0 Pkts	0 Pkts	13 C
1789915302	6 Pkts	6 Pkts	3 Pkts	12 C
1789911702	5 Pkts	5 Pkts	2 Pkts	12 C
1789908102	6 Pkts	6 Pkts	2 Pkts	12 C
1789904502	0 Pkts	0 Pkts	0 Pkts	12 C
1789900902	43 Pkts	43 Pkts	10 Pkts	12 C
1789897302	201 Pkts	200 Pkts	56 Pkts	12 C
1789893702	187 Pkts	187 Pkts	44 Pkts	12 C
1789890102	200 Pkts	199 Pkts	51 Pkts	12 C
1789886502	29 Pkts	28 Pkts	12 Pkts	12 C
1789882902	158 Pkts	158 Pkts	34 Pkts	12 C
1789879302	208 Pkts	208 Pkts	38 Pkts	12 C
1789875703	149 Pkts	148 Pkts	40 Pkts	13 C
1789872102	0 Pkts	0 Pkts	0 Pkts	13 C
1789868502	0 Pkts	0 Pkts	0 Pkts	14 C
1789864902	0 Pkts	0 Pkts	0 Pkts	14 C
1789861302	2 Pkts	2 Pkts	1 Pkts	14 C
1789857702	0 Pkts	0 Pkts	0 Pkts	14 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)