BX5ACG-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX5ACG-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*	DiGi*
1753623664	53 C	49 p	172 p	2026 p	255 p
1753621265	53 C	56 p	131 p	1957 p	172 p
1753620065	53 C	43 p	88 p	1921 p	126 p
1753618866	54 C	32 p	55 p	1900 p	95 p
1753616463	54 C	10 p	32 p	1899 p	74 p
1753615264	54 C	10 p	32 p	1952 p	73 p
1753612863	54 C	10 p	118 p	2209 p	72 p
1753611663	54 C	37 p	179 p	2311 p	71 p
1753610464	54 C	71 p	191 p	2431 p	71 p
1753609263	55 C	71 p	150 p	2531 p	69 p
1753608063	55 C	49 p	102 p	2482 p	58 p
1753606863	55 C	30 p	84 p	2450 p	45 p
1753604463	56 C	31 p	107 p	2430 p	29 p
1753603264	56 C	32 p	103 p	2419 p	17 p
1753602073	56 C	44 p	103 p	2409 p	9 p
1753600863	54 C	27 p	115 p	2391 p	4 p
1753600467	49 C	3 p	108 p	2373 p	0 p
1753600465	49 C	3 p	108 p	2373 p	0 p
1753600464	48 C	3 p	109 p	2373 p	0 p
1753598464	57 C	56 p	135 p	2346 p	394 p
1753597264	57 C	41 p	98 p	2305 p	381 p
1753596064	55 C	38 p	77 p	2280 p	371 p
1753594864	55 C	19 p	62 p	2269 p	357 p
1753593664	54 C	20 p	107 p	2263 p	354 p
1753592464	54 C	23 p	114 p	2259 p	351 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)