4S7CRA-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 4S7CRA-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1762411272	68 Count	0 Count	0 Count	0 VDC	0 VDC
1762410669	67 Count	0 Count	0 Count	0 VDC	0 VDC
1762348578	65 Count	0 Count	0 Count	0 VDC	0 VDC
1762347370	63 Count	0 Count	0 Count	0 VDC	0 VDC
1762347359	62 Count	0 Count	0 Count	0 VDC	0 VDC
1762347056	61 Count	0 Count	0 Count	0 VDC	0 VDC
1762346824	60 Count	0 Count	0 Count	0 VDC	0 VDC
1762346786	55 Count	0 Count	0 Count	0 VDC	0 VDC
1762346786	57 Count	0 Count	0 Count	0 VDC	0 VDC
1762346786	59 Count	0 Count	0 Count	0 VDC	0 VDC
1762346771	58 Count	0 Count	0 Count	0 VDC	0 VDC
1762346719	57 Count	0 Count	0 Count	0 VDC	0 VDC
1762346697	56 Count	0 Count	0 Count	0 VDC	0 VDC
1762346679	55 Count	0 Count	0 Count	0 VDC	0 VDC
1762346511	54 Count	0 Count	0 Count	0 VDC	0 VDC
1762345979	52 Count	0 Count	0 Count	0 VDC	0 VDC
1762345434	50 Count	0 Count	0 Count	0 VDC	0 VDC
1762345286	47 Count	0 Count	0 Count	0 VDC	0 VDC
1762345223	46 Count	0 Count	0 Count	0 VDC	0 VDC
1762345160	45 Count	0 Count	0 Count	0 VDC	0 VDC
1762345033	43 Count	0 Count	0 Count	0 VDC	0 VDC
1762344970	42 Count	0 Count	0 Count	0 VDC	0 VDC
1762344843	40 Count	0 Count	0 Count	0 VDC	0 VDC
1762344780	39 Count	0 Count	0 Count	0 VDC	0 VDC
1762344716	38 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)