YH3AJS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH3AJS-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1761551976	109 Pkt	0 Pkt	-45 dBm	13.49 V
1761550151	64 Pkt	0 Pkt	-46 dBm	13.47 V
1761548325	60 Pkt	0 Pkt	-43 dBm	13.56 V
1761546501	82 Pkt	0 Pkt	-43 dBm	13.45 V
1761544677	51 Pkt	0 Pkt	-45 dBm	13.47 V
1761542851	79 Pkt	0 Pkt	-43 dBm	13.45 V
1761542851	79 Pkt	0 Pkt	-44 dBm	13.45 V
1761541025	86 Pkt	0 Pkt	-44 dBm	13.49 V
1761539199	62 Pkt	0 Pkt	-45 dBm	13.47 V
1761537373	7 Pkt	0 Pkt	-45 dBm	13.49 V
1761535477	74 Pkt	0 Pkt	-43 dBm	13.45 V
1761533650	74 Pkt	0 Pkt	-44 dBm	13.54 V
1761533650	74 Pkt	0 Pkt	-47 dBm	13.54 V
1761531824	86 Pkt	0 Pkt	-44 dBm	13.47 V
1761530006	60 Pkt	0 Pkt	-43 dBm	13.49 V
1761528174	64 Pkt	0 Pkt	-44 dBm	13.45 V
1761526349	90 Pkt	0 Pkt	-43 dBm	13.47 V
1761522698	118 Pkt	0 Pkt	-44 dBm	13.56 V
1761522698	118 Pkt	0 Pkt	-43 dBm	13.56 V
1761520870	96 Pkt	0 Pkt	-42 dBm	13.56 V
1761517217	123 Pkt	0 Pkt	-43 dBm	13.47 V
1761515389	5 Pkt	0 Pkt	-43 dBm	13.45 V
1761513489	143 Pkt	1 Pkt	-44 dBm	13.49 V
1761511660	106 Pkt	0 Pkt	-44 dBm	13.56 V
1761506781	106 Pkt	0 Pkt	-47 dBm	13.54 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)