IR2ZYA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2ZYA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff*
1776684889	65 Pkt	280 Pkt	0 Pkt	1.72 Pcnt	75 Pcnt
1776684589	60 Pkt	270 Pkt	1 Pkt	1.72 Pcnt	75 Pcnt
1776684289	48 Pkt	260 Pkt	1 Pkt	1.72 Pcnt	75 Pcnt
1776683989	37 Pkt	260 Pkt	0 Pkt	1.72 Pcnt	75 Pcnt
1776683689	33 Pkt	260 Pkt	0 Pkt	1.72 Pcnt	75 Pcnt
1776683389	33 Pkt	260 Pkt	0 Pkt	1.72 Pcnt	75 Pcnt
1776683089	44 Pkt	260 Pkt	0 Pkt	1.72 Pcnt	75 Pcnt
1776682789	48 Pkt	260 Pkt	0 Pkt	1.72 Pcnt	75 Pcnt
1776682489	44 Pkt	260 Pkt	0 Pkt	1.72 Pcnt	75 Pcnt
1776682189	30 Pkt	260 Pkt	0 Pkt	1.72 Pcnt	75 Pcnt
1776681889	31 Pkt	260 Pkt	0 Pkt	1.72 Pcnt	75 Pcnt
1776681589	38 Pkt	260 Pkt	1 Pkt	1.72 Pcnt	75 Pcnt
1776681289	40 Pkt	270 Pkt	1 Pkt	1.72 Pcnt	75 Pcnt
1776680989	50 Pkt	300 Pkt	0 Pkt	1.72 Pcnt	75 Pcnt
1776680689	55 Pkt	340 Pkt	0 Pkt	1.72 Pcnt	75 Pcnt
1776680389	32 Pkt	330 Pkt	0 Pkt	1.73 Pcnt	75 Pcnt
1776680089	32 Pkt	330 Pkt	0 Pkt	1.73 Pcnt	75 Pcnt
1776679789	42 Pkt	340 Pkt	0 Pkt	1.73 Pcnt	75 Pcnt
1776679489	50 Pkt	350 Pkt	0 Pkt	1.73 Pcnt	75 Pcnt
1776679189	47 Pkt	340 Pkt	0 Pkt	1.73 Pcnt	75 Pcnt
1776678889	39 Pkt	340 Pkt	0 Pkt	1.73 Pcnt	75 Pcnt
1776678589	32 Pkt	340 Pkt	0 Pkt	1.73 Pcnt	75 Pcnt
1776678289	46 Pkt	340 Pkt	0 Pkt	1.73 Pcnt	75 Pcnt
1776677989	81 Pkt	330 Pkt	1 Pkt	1.73 Pcnt	75 Pcnt
1776677689	94 Pkt	340 Pkt	3 Pkt	1.73 Pcnt	75 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)