J41VAA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object J41VAA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1784710598	-	-	-	-	-
1784710188	0.05 Rx Erlang	0.02 Tx Erlang	43 count/10m	7 count/10m	12 count/10m
1784709511	-	-	-	-	-
1784708988	0.05 Rx Erlang	0.01 Tx Erlang	52 count/10m	2 count/10m	14 count/10m
1784707901	-	-	-	-	-
1784707788	0.04 Rx Erlang	0.01 Tx Erlang	38 count/10m	4 count/10m	9 count/10m
1784706833	-	-	-	-	-
1784706587	0.05 Rx Erlang	0.02 Tx Erlang	41 count/10m	5 count/10m	14 count/10m
1784705745	-	-	-	-	-
1784705388	0.05 Rx Erlang	0.01 Tx Erlang	46 count/10m	8 count/10m	9 count/10m
1784704661	-	-	-	-	-
1784704188	0.05 Rx Erlang	0.01 Tx Erlang	48 count/10m	8 count/10m	13 count/10m
1784703032	-	-	-	-	-
1784703008	0.07 Rx Erlang	0.02 Tx Erlang	61 count/10m	14 count/10m	15 count/10m
1784701897	-	-	-	-	-
1784701788	0.05 Rx Erlang	0.01 Tx Erlang	51 count/10m	7 count/10m	12 count/10m
1784700916	-	-	-	-	-
1784700587	0.06 Rx Erlang	0.01 Tx Erlang	50 count/10m	8 count/10m	10 count/10m
1784699856	-	-	-	-	-
1784699388	0.06 Rx Erlang	0.02 Tx Erlang	61 count/10m	11 count/10m	15 count/10m
1784698235	-	-	-	-	-
1784698188	0.05 Rx Erlang	0.01 Tx Erlang	47 count/10m	11 count/10m	11 count/10m
1784697192	-	-	-	-	-
1784696988	0.05 Rx Erlang	0.01 Tx Erlang	50 count/10m	6 count/10m	11 count/10m
1784696145	-	-	-	-	-

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)