KE9CPD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KE9CPD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1753786202	54 Deg.C	2 %
1753785607	54 Deg.C	2 %
1753784407	55 Deg.C	2 %
1753783206	54 Deg.C	2 %
1753782602	54 Deg.C	2 %
1753782002	54 Deg.C	2 %
1753780206	55 Deg.C	2 %
1753778401	56 Deg.C	2 %
1753777802	55 Deg.C	2 %
1753776601	56 Deg.C	2 %
1753776018	57 Deg.C	2 %
1753774807	58 Deg.C	2 %
1753774202	57 Deg.C	2 %
1753773602	58 Deg.C	2 %
1753773007	57 Deg.C	2 %
1753772402	56 Deg.C	2 %
1753771806	55 Deg.C	2 %
1753771201	57 Deg.C	2 %
1753770002	57 Deg.C	2 %
1753769402	57 Deg.C	2 %
1753768807	57 Deg.C	2 %
1753768202	57 Deg.C	2 %
1753767606	56 Deg.C	2 %
1753767001	55 Deg.C	2 %
1753766406	54 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)