SQ5NWI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SQ5NWI-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temperatura CPU*	Obciazenie CPU*
1773130201	72 Deg.C	2 %
1773129602	71 Deg.C	2 %
1773129005	70 Deg.C	2 %
1773128402	71 Deg.C	2 %
1773127804	71 Deg.C	2 %
1773127201	71 Deg.C	2 %
1773126610	72 Deg.C	2 %
1773126001	71 Deg.C	2 %
1773125402	71 Deg.C	2 %
1773124804	70 Deg.C	2 %
1773124202	70 Deg.C	2 %
1773123605	70 Deg.C	2 %
1773123001	71 Deg.C	2 %
1773122405	71 Deg.C	2 %
1773121801	71 Deg.C	2 %
1773121205	70 Deg.C	2 %
1773120601	70 Deg.C	2 %
1773120006	70 Deg.C	2 %
1773119402	71 Deg.C	2 %
1773118809	72 Deg.C	2 %
1773118201	70 Deg.C	2 %
1773117601	71 Deg.C	2 %
1773117005	71 Deg.C	2 %
1773116401	71 Deg.C	2 %
1773115805	70 Deg.C	2 %

*Used Equation Coefficients:

Temperatura CPU: 0, 0.1, 0

Obciazenie CPU: 0, 1, 0

Value3: 0, 0, 0

Value4: 0, 0, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)