WA3MEZ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WA3MEZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1773215214	131 Pkts	131 Pkts	38 Pkts	34 C
1773211614	140 Pkts	139 Pkts	42 Pkts	34 C
1773208014	185 Pkts	184 Pkts	59 Pkts	34 C
1773204414	192 Pkts	191 Pkts	55 Pkts	34 C
1773200814	235 Pkts	234 Pkts	62 Pkts	34 C
1773197214	193 Pkts	193 Pkts	52 Pkts	34 C
1773193614	217 Pkts	215 Pkts	77 Pkts	35 C
1773190014	229 Pkts	228 Pkts	72 Pkts	34 C
1773186414	243 Pkts	242 Pkts	76 Pkts	35 C
1773182814	281 Pkts	278 Pkts	72 Pkts	35 C
1773179214	311 Pkts	310 Pkts	94 Pkts	34 C
1773175614	257 Pkts	256 Pkts	92 Pkts	35 C
1773172014	218 Pkts	215 Pkts	97 Pkts	35 C
1773168417	227 Pkts	222 Pkts	60 Pkts	34 C
1773164814	250 Pkts	245 Pkts	72 Pkts	35 C
1773161214	251 Pkts	245 Pkts	56 Pkts	35 C
1773157614	186 Pkts	182 Pkts	42 Pkts	35 C
1773154014	532 Pkts	516 Pkts	106 Pkts	34 C
1773150414	406 Pkts	392 Pkts	83 Pkts	35 C
1773146814	553 Pkts	522 Pkts	100 Pkts	35 C
1773143213	456 Pkts	445 Pkts	88 Pkts	34 C
1773139613	365 Pkts	356 Pkts	72 Pkts	34 C
1773136013	338 Pkts	324 Pkts	54 Pkts	34 C
1773132413	512 Pkts	497 Pkts	87 Pkts	34 C
1773128813	608 Pkts	590 Pkts	108 Pkts	34 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)