Overview Statistics Trail Chart Weather Telemetry Raw packets
 

This is the latest recevied telemetry packets stored in our database for station/object SR5TM-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>
Time RxTraffic* TxTraffic* RxDrop* RSSI* Voltage*
1772844434 44 Pkt 0 Pkt 0 Pkt -48 dBm 14.07 V
1772843796 32 Pkt 0 Pkt 0 Pkt -46 dBm 14.03 V
1772843169 21 Pkt 0 Pkt 0 Pkt -44 dBm 14.05 V
1772842541 50 Pkt 0 Pkt 0 Pkt -45 dBm 14.05 V
1772841280 31 Pkt 0 Pkt 0 Pkt -46 dBm 14.05 V
1772840652 28 Pkt 0 Pkt 0 Pkt -46 dBm 14.09 V
1772840024 46 Pkt 0 Pkt 0 Pkt -45 dBm 14.03 V
1772839395 31 Pkt 0 Pkt 0 Pkt -45 dBm 14.05 V
1772838766 39 Pkt 0 Pkt 0 Pkt -46 dBm 14.07 V
1772838136 6 Pkt 0 Pkt 0 Pkt -46 dBm 14.03 V
1772837558 40 Pkt 0 Pkt 0 Pkt -46 dBm 14.05 V
1772836930 30 Pkt 0 Pkt 0 Pkt -45 dBm 14.05 V
1772836303 34 Pkt 0 Pkt 0 Pkt -45 dBm 14.07 V
1772835675 2 Pkt 0 Pkt 0 Pkt -45 dBm 14.05 V
1772835361 33 Pkt 0 Pkt 0 Pkt -47 dBm 14.03 V
1772834729 44 Pkt 0 Pkt 0 Pkt -47 dBm 14.03 V
1772834100 30 Pkt 0 Pkt 0 Pkt -47 dBm 14.05 V
1772832848 5 Pkt 0 Pkt 0 Pkt -47 dBm 14.05 V
1772832223 6 Pkt 0 Pkt 0 Pkt -46 dBm 14.07 V
1772831598 10 Pkt 0 Pkt 0 Pkt -47 dBm 14.05 V
1772830973 5 Pkt 0 Pkt 0 Pkt -46 dBm 14.09 V
1772830348 7 Pkt 0 Pkt 0 Pkt -44 dBm 14.07 V
1772829724 5 Pkt 0 Pkt 0 Pkt -35 dBm 14.05 V
1772829099 2 Pkt 0 Pkt 0 Pkt -39 dBm 14.05 V
1772828475 1 Pkt 0 Pkt 0 Pkt -40 dBm 14.03 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0

  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)