DA1UR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DA1UR-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1761491717	999.7 hPa	19.7 C deg	64.6 %	261 -	9.9 C deg
1761488117	999.2 hPa	19 C deg	63.5 %	265 -	10.4 C deg
1761486317	999 hPa	18.7 C deg	67.1 %	256 -	9.5 C deg
1761484517	999 hPa	18.6 C deg	68.3 %	256 -	8.9 C deg
1761480917	998.7 hPa	19.3 C deg	60.1 %	385 -	8.2 C deg
1761479948	998.8 hPa	18.8 C deg	61.3 %	311 -	7.9 C deg
1761478155	998.6 hPa	18.1 C deg	59.8 %	341 -	9 C deg
1761478147	998.6 hPa	18.1 C deg	59.8 %	341 -	9 C deg
1761476348	998.4 hPa	18.3 C deg	61.4 %	310 -	10 C deg
1761474546	998.3 hPa	18.3 C deg	63.2 %	293 -	8.4 C deg
1761472745	997.9 hPa	18.2 C deg	63.6 %	319 -	8.6 C deg
1761470945	997.6 hPa	17.9 C deg	62.3 %	329 -	8 C deg
1761467345	996.9 hPa	17.8 C deg	62.8 %	325 -	6.4 C deg
1761465544	996.4 hPa	18.3 C deg	64.3 %	322 -	6.4 C deg
1761463745	995.9 hPa	18.4 C deg	62 %	332 -	6.1 C deg
1761461952	995.6 hPa	18.3 C deg	62.1 %	331 -	5.8 C deg
1761461950	995.6 hPa	18.3 C deg	62.1 %	331 -	5.8 C deg
1761460144	995.5 hPa	18.3 C deg	63.7 %	323 -	5.5 C deg
1761458344	995.3 hPa	18.4 C deg	60 %	342 -	5.9 C deg
1761456544	995.4 hPa	19 C deg	60.3 %	319 -	5.9 C deg
1761454746	995.3 hPa	18 C deg	63.4 %	324 -	5.7 C deg
1761452944	995.4 hPa	18.1 C deg	61.7 %	331 -	5.6 C deg
1761451149	995.4 hPa	18.4 C deg	60.4 %	332 -	5.4 C deg
1761449343	995.7 hPa	18.6 C deg	61.9 %	317 -	5.9 C deg
1761445743	995.9 hPa	18.7 C deg	61.5 %	305 -	6.6 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)